Hopp til hovedinnhold
Logg ut

Velkommen til Dell

Min konto
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.
Logg på Opprett en konto Premier-pålogging Pålogging for partnerprogrammet
Kontakt oss

Dine Dell.com-handlevogner

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Updating single device firmware

Before updating the firmware using single device update method, make sure that you have downloaded the firmware image to a location on the local system.
  • NOTE: Ensure that the file name for the single component DUP does not have any blank space.

To update single device firmware using iDRAC web interface:

  1. Go to Overview > iDRAC Settings > Update and Rollback. The Firmware Update page is displayed.
  2. On the Update tab, select Local as the File Location.
  3. Click Browse, select the firmware image file for the required component, and then click Upload.
  4. After the upload is complete, the Update Details section displays each firmware file uploaded to iDRAC and its status. If the firmware image file is valid and was successfully uploaded, the Contents column displays a plus icon ( ) icon next to the firmware image file name. Expand the name to view the Device Name, Current, and Available firmware version information.
  5. Select the required firmware file to be updated and do one of the following:
    • For firmware images that do not require a host system reboot, click Install. For example, iDRAC firmware file.
    • For firmware images that require a host system reboot, click Install and Reboot or Install Next Reboot .
    • To cancel the firmware update, click Cancel.

    When you click Install, Install and Reboot, or Install Next Reboot, the message Updating Job Queue is displayed.

  6. Click Job Queue to display the Job Queue page, where you can view and manage the staged firmware updates or click OK to refresh the current page and view the status of the firmware update.
    • NOTE: If you navigate away from the page without saving the updates, an error message is displayed and all the uploaded content is lost.

Vurder dette innholdet

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
0/3000 characters
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Velg om artikkelen var nyttig eller ikke.
  Kommentarer kan ikke inneholde disse spesialtegnene: <>()\