Hopp til hovedinnhold
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.

iDRAC 8/7 v2.30.30.30 User’s Guide

Rollback firmware using iDRAC web interface

To roll back device firmware:
  1. In the iDRAC Web interface, go to Overview > iDRAC Settings > Update and Rollback > Rollback . The Rollback page displays the devices for which you can rollback the firmware. You can view the device name, associated devices, currently installed firmware version, and the available firmware rollback version.
  2. Select one or more devices for which you want to rollback the firmware.
  3. Based on the selected devices, click Install and Reboot or Install Next Reboot. If only iDRAC is selected, then click Install. When you click Install and Reboot or Install Next Reboot, the message “Updating Job Queue” is displayed.
  4. Click Job Queue. The Job Queue page is displayed, where you can view and manage the staged firmware updates.
    • NOTE:
      • While in rollback mode, the rollback process continues in the background even if you navigate away from this page.
    An error message appears if:
    • You do not have Server Control privilege to rollback any firmware other than the iDRAC or Configure privilege to rollback iDRAC firmware.
    • Firmware rollback is already in-progress in another session.
    • Updates are staged to run or already in running state.

    If Lifecycle Controller is disabled or in recovery state and you try to perform a firmware rollback for any device other than iDRAC, an appropriate warning message is displayed along with steps to enable Lifecycle Controller.


Vurder dette innholdet

Nøyaktig
Nyttig
Brukervennlig
Var denne artikkelen nyttig?
0/3000 characters
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Oppgi vurderinger (1–5 stjerner).
  Velg om artikkelen var nyttig eller ikke.
  Kommentarer kan ikke inneholde disse spesialtegnene: <>()\