Przejdź do głównej zawartości
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów

OptiPlex 5040 - Mini Tower Owner's Manual

PDF

Installing the power supply unit (PSU)

  1. Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place.
  2. Tighten the screws to secure the PSU to the computer.
  3. Route the PSU cables through the retention clips.
  4. Connect the PSU cables to the connectors on the system board.
  5. Close the front bezel door.
  6. Install the:
  7. Follow the procedure in After Working Inside Your Computer .

Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\