Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

getioinfo

Table 1. Details of getioinfo. The following table provides the details of getioinfo attribute:
Description	Displays general information about the stack and I/O modules on the chassis. To use this subcommand, you must have the CMC Login User privilege. NOTE: The fabric type may be any supported I/O fabric type, such as Ethernet, Fiber Channel, and Infiniband.
Synopsis	racadm getioinfo [-m <module>] [-s]
Input	`-m` — Specifies the module or device. The `<module>` must be switch — <n>, where n = 1–2 `-s` — Displays the stack information.

Table 3. **Example 2** .
racadm getioinfo -m switch-1
< IO>	< Name>	< Type>	< Presence>	< POST>	< Power>	< Role>	< SecureMode>	< Mode>
Switch-1	1GBE PASS-THROUGH MODULE	Gigabit Ethernet	Present	OK	ON	Master	No	N/A