Przejdź do głównej zawartości
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów

Alienware m17 Service Manual

Procedure

  1. Open the latch and disconnect the touchpad cable from the system board.
  2. Remove the four screws (M2x2.5) that secure the touchpad to the palm-rest assembly.
  3. Slide the touchpad along with its cable at an angle and lift the touchpad off the palm-rest assembly.
    Image: Removing the touchpad

Oceń tę zawartość

Trafne
Przydatne
Łatwe do zrozumienia
Czy ten artykuł był przydatny?
0/3000 characters
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Podaj ocenę (od 1 do 5 gwiazdek).
  Określ, czy artykuł były przydatny, czy nie.
  Komentarze nie mogą zawierać znaków specjalnych: <>()\