TPM_E_ERROR_MASK 0x80280000 |
This is an error mask to convert TPM hardware errors to win errors. |
TPM_E_AUTHFAIL 0x80280001 |
Authentication failed. |
TPM_E_BADINDEX 0x80280002 |
The index to a PCR, DIR or other register is incorrect. |
TPM_E_BAD_PARAMETER 0x80280003 |
One or more parameters is bad. |
TPM_E_AUDITFAILURE 0x80280004 |
An operation completed successfully but the auditing of that operation failed. |
TPM_E_CLEAR_DISABLED 0x80280005 |
The clear disable flag is set and all clear operations now require physical access. |
TPM_E_DEACTIVATED 0x80280006 |
Activate the TPM. |
TPM_E_DISABLED 0x80280007 |
Enable the TPM. |
TPM_E_DISABLED_CMD 0x80280008 |
The target command has been disabled. |
TPM_E_FAIL 0x80280009 |
The operation failed. |
TPM_E_BAD_ORDINAL 0x8028000A |
The ordinal was unknown or inconsistent. |
TPM_E_INSTALL_DISABLED 0x8028000B |
The ability to install an owner is disabled. |
TPM_E_INVALID_KEYHANDLE 0x8028000C |
The key handle cannot be interpreted. |
TPM_E_KEYNOTFOUND 0x8028000D |
The key handle points to an invalid key. |
TPM_E_INAPPROPRIATE_ENC 0x8028000E |
Unacceptable encryption scheme. |
TPM_E_MIGRATEFAIL 0x8028000F |
Migration authorization failed. |
TPM_E_INVALID_PCR_INFO 0x80280010 |
PCR information could not be interpreted. |
TPM_E_NOSPACE 0x80280011 |
No room to load key. |
TPM_E_NOSRK 0x80280012 |
There is no Storage Root Key (SRK) set. |
TPM_E_NOTSEALED_BLOB 0x80280013 |
An encrypted blob is invalid or was not created by this TPM. |
TPM_E_OWNER_SET 0x80280014 |
The TPM already has an owner. |
TPM_E_RESOURCES 0x80280015 |
The TPM has insufficient internal resources to perform the requested action. |
TPM_E_SHORTRANDOM 0x80280016 |
A random string was too short. |
TPM_E_SIZE 0x80280017 |
The TPM does not have the space to perform the operation. |
TPM_E_WRONGPCRVAL 0x80280018 |
The named PCR value does not match the current PCR value. |
TPM_E_BAD_PARAM_SIZE 0x80280019 |
The paramSize argument to the command has the incorrect value |
TPM_E_SHA_THREAD 0x8028001A |
There is no existing SHA-1 thread. |
TPM_E_SHA_ERROR 0x8028001B |
The calculation is unable to proceed because the existing SHA-1 thread has already encountered an error. |
TPM_E_FAILEDSELFTEST 0x8028001C |
The TPM hardware device reported a failure during its internal self test. Try restarting the computer to resolve the problem. If the problem continues, you might need to replace your TPM hardware or motherboard. |
TPM_E_AUTH2FAIL 0x8028001D |
The authorization for the second key in a 2 key function failed authorization. |
TPM_E_BADTAG 0x8028001E |
The tag value sent to for a command is invalid. |
TPM_E_IOERROR 0x8028001F |
An IO error occurred transmitting information to the TPM. |
TPM_E_ENCRYPT_ERROR 0x80280020 |
The encryption process had a problem. |
TPM_E_DECRYPT_ERROR 0x80280021 |
The decryption process did not complete. |
TPM_E_INVALID_AUTHHANDLE 0x80280022 |
An invalid handle was used. |
TPM_E_NO_ENDORSEMENT 0x80280023 |
The TPM does not have an Endorsement Key (EK) installed. |
TPM_E_INVALID_KEYUSAGE 0x80280024 |
The usage of a key is not allowed. |
TPM_E_WRONG_ENTITYTYPE 0x80280025 |
The submitted entity type is not allowed. |
TPM_E_INVALID_POSTINIT 0x80280026 |
The command was received in the wrong sequence relative to TPM_Init and a subsequent TPM_Startup. |
TPM_E_INAPPROPRIATE_SIG 0x80280027 |
Signed data cannot include additional DER information. |
TPM_E_BAD_KEY_PROPERTY 0x80280028 |
The key properties in TPM_KEY_PARMs are not supported by this TPM. |
TPM_E_BAD_MIGRATION 0x80280029 |
The migration properties of this key are incorrect. |
TPM_E_BAD_SCHEME 0x8028002A |
The signature or encryption scheme for this key is incorrect or not permitted in this situation. |
TPM_E_BAD_DATASIZE 0x8028002B |
The size of the data (or blob) parameter is bad or inconsistent with the referenced key. |
TPM_E_BAD_MODE 0x8028002C |
A mode parameter is bad, such as capArea or subCapArea for TPM_GetCapability, phsicalPresence parameter for TPM_PhysicalPresence, or migrationType for TPM_CreateMigrationBlob. |
TPM_E_BAD_PRESENCE 0x8028002D |
Either the physicalPresence or physicalPresenceLock bits have the wrong value. |
TPM_E_BAD_VERSION 0x8028002E |
The TPM cannot perform this version of the capability. |
TPM_E_NO_WRAP_TRANSPORT 0x8028002F |
The TPM does not allow for wrapped transport sessions. |
TPM_E_AUDITFAIL_UNSUCCESSFUL 0x80280030 |
TPM audit construction failed and the underlying command was returning a failure code also. |
TPM_E_AUDITFAIL_SUCCESSFUL 0x80280031 |
TPM audit construction failed and the underlying command was returning success. |
TPM_E_NOTRESETABLE 0x80280032 |
Attempt to reset a PCR register that does not have the resettable attribute. |
TPM_E_NOTLOCAL 0x80280033 |
Attempt to reset a PCR register that requires locality and locality modifier not part of command transport. |
TPM_E_BAD_TYPE 0x80280034 |
Make identity blob not properly typed. |
TPM_E_INVALID_RESOURCE 0x80280035 |
When saving context identified resource type does not match actual resource. |
TPM_E_NOTFIPS 0x80280036 |
The TPM is attempting to execute a command only available when in FIPS mode. |
TPM_E_INVALID_FAMILY 0x80280037 |
The command is attempting to use an invalid family ID. |
TPM_E_NO_NV_PERMISSION 0x80280038 |
The permission to manipulate the NV storage is not available. |
TPM_E_REQUIRES_SIGN 0x80280039 |
The operation requires a signed command. |
TPM_E_KEY_NOTSUPPORTED 0x8028003A |
Wrong operation to load an NV key. |
TPM_E_AUTH_CONFLICT 0x8028003B |
NV_LoadKey blob requires both owner and blob authorization. |
TPM_E_AREA_LOCKED 0x8028003C |
The NV area is locked and not writtable. |
TPM_E_BAD_LOCALITY 0x8028003D |
The locality is incorrect for the attempted operation. |
TPM_E_READ_ONLY 0x8028003E |
The NV area is read only and cannot be written to. |
TPM_E_PER_NOWRITE 0x8028003F |
There is no protection on the write to the NV area. |
TPM_E_FAMILYCOUNT 0x80280040 |
The family count value does not match. |
TPM_E_WRITE_LOCKED 0x80280041 |
The NV area has already been written to. |
TPM_E_BAD_ATTRIBUTES 0x80280042 |
The NV area attributes conflict. |
TPM_E_INVALID_STRUCTURE 0x80280043 |
The structure tag and version are invalid or inconsistent. |
TPM_E_KEY_OWNER_CONTROL 0x80280044 |
The key is under control of the TPM Owner and can only be evicted by the TPM Owner. |
TPM_E_BAD_COUNTER 0x80280045 |
The counter handle is incorrect. |
TPM_E_NOT_FULLWRITE 0x80280046 |
The write is not a complete write of the area. |
TPM_E_CONTEXT_GAP 0x80280047 |
The gap between saved context counts is too large. |
TPM_E_MAXNVWRITES 0x80280048 |
The maximum number of NV writes without an owner has been exceeded. |
TPM_E_NOOPERATOR 0x80280049 |
No operator AuthData value is set. |
TPM_E_RESOURCEMISSING 0x8028004A |
The resource pointed to by context is not loaded. |
TPM_E_DELEGATE_LOCK 0x8028004B |
The delegate administration is locked. |
TPM_E_DELEGATE_FAMILY 0x8028004C |
Attempt to manage a family other than the delegated family. |
TPM_E_DELEGATE_ADMIN 0x8028004D |
Delegation table management not enabled. |
TPM_E_TRANSPORT_NOTEXCLUSIVE 0x8028004E |
There was a command executed outside of an exclusive transport session. |
TPM_E_OWNER_CONTROL 0x8028004F |
Attempt to context save a owner evict controlled key. |
TPM_E_DAA_RESOURCES 0x80280050 |
The DAA command has no resources available to execute the command. |
TPM_E_DAA_INPUT_DATA0 0x80280051 |
The consistency check on DAA parameter inputData0 has failed. |
TPM_E_DAA_INPUT_DATA1 0x80280052 |
The consistency check on DAA parameter inputData1 has failed. |
TPM_E_DAA_ISSUER_SETTINGS 0x80280053 |
The consistency check on DAA_issuerSettings has failed. |
TPM_E_DAA_TPM_SETTINGS 0x80280054 |
The consistency check on DAA_tpmSpecific has failed. |
TPM_E_DAA_STAGE 0x80280055 |
The atomic process indicated by the submitted DAA command is not the expected process. |
TPM_E_DAA_ISSUER_VALIDITY 0x80280056 |
The issuer's validity check has detected an inconsistency. |
TPM_E_DAA_WRONG_W 0x80280057 |
The consistency check on w has failed. |
TPM_E_BAD_HANDLE 0x80280058 |
The handle is incorrect. |
TPM_E_BAD_DELEGATE 0x80280059 |
Delegation is not correct. |
TPM_E_BADCONTEXT 0x8028005A |
The context blob is invalid. |
TPM_E_TOOMANYCONTEXTS 0x8028005B |
Too many contexts held by the TPM. |
TPM_E_MA_TICKET_SIGNATURE 0x8028005C |
Migration authority signature validation failure. |
TPM_E_MA_DESTINATION 0x8028005D |
Migration destination not authenticated. |
TPM_E_MA_SOURCE 0x8028005E |
Migration source incorrect. |
TPM_E_MA_AUTHORITY 0x8028005F |
Incorrect migration authority. |
TPM_E_PERMANENTEK 0x80280061 |
Attempt to revoke the EK and the EK is not revocable. |
TPM_E_BAD_SIGNATURE 0x80280062 |
Bad signature of CMK ticket. |
TPM_E_NOCONTEXTSPACE 0x80280063 |
There is no room in the context list for additional contexts. |
TPM_E_COMMAND_BLOCKED 0x80280400 |
The command was blocked. |
TPM_E_INVALID_HANDLE 0x80280401 |
The specified handle was not found. |
TPM_E_DUPLICATE_VHANDLE 0x80280402 |
The TPM returned a duplicate handle and the command needs to be resubmitted. |
TPM_E_EMBEDDED_COMMAND_BLOCKED 0x80280403 |
The command within the transport was blocked. |
TPM_E_EMBEDDED_COMMAND_UNSUPPORTED 0x80280404 |
The command within the transport is not supported. |
TPM_E_RETRY 0x80280800 |
The TPM is too busy to respond to the command immediately, but the command could be resubmitted at a later time. |
TPM_E_NEEDS_SELFTEST 0x80280801 |
SelfTestFull has not been run. |
TPM_E_DOING_SELFTEST 0x80280802 |
The TPM is currently executing a full self test. |
TPM_E_DEFEND_LOCK_RUNNING 0x80280803 |
The TPM is defending against dictionary attacks and is in a time-out period. |
TBS_E_INTERNAL_ERROR 0x80284001 |
An internal software error has been detected. |
TBS_E_BAD_PARAMETER 0x80284002 |
One or more input parameters is bad. |
TBS_E_INVALID_OUTPUT_POINTER 0x80284003 |
A specified output pointer is bad. |
TBS_E_INVALID_CONTEXT 0x80284004 |
The specified context handle does not refer to a valid context. |
TBS_E_INSUFFICIENT_BUFFER 0x80284005 |
A specified output buffer is too small. |
TBS_E_IOERROR 0x80284006 |
An error occurred while communicating with the TPM. |
TBS_E_INVALID_CONTEXT_PARAM 0x80284007 |
One or more context parameters is invalid. |
TBS_E_SERVICE_NOT_RUNNING 0x80284008 |
The TBS service is not running and could not be started. |
TBS_E_TOO_MANY_TBS_CONTEXTS 0x80284009 |
A new context could not be created because there are too many open contexts. |
TBS_E_TOO_MANY_RESOURCES 0x8028400A |
A new virtual resource could not be created because there are too many open virtual resources. |
TBS_E_SERVICE_START_PENDING 0x8028400B |
The TBS service has been started but is not yet running. |
TBS_E_PPI_NOT_SUPPORTED 0x8028400C |
The physical presence interface is not supported. |
TBS_E_COMMAND_CANCELED 0x8028400D |
The command was canceled. |
TBS_E_BUFFER_TOO_LARGE 0x8028400E |
The input or output buffer is too large. |
TBS_E_TPM_NOT_FOUND 0x8028400F |
A compatible TPM Security Device cannot be found on this computer. |
TBS_E_SERVICE_DISABLED 0x80284010 |
The TBS service has been disabled. |
TBS_E_NO_EVENT_LOG 0x80284011 |
No TCG event log is available. |
TBS_E_ACCESS_DENIED 0x80284012 |
The caller does not have the appropriate rights to perform the requested operation. |
TBS_E_PROVISIONING_NOT_ALLOWED 0x80284013 |
The TPM provisioning action is not allowed by the specified flags. For provisioning to be successful, one of several actions may be required. The TPM management console (tpm.msc) action to make the TPM Ready may help. For further information, see the documentation for the Win32_Tpm WMI method 'Provision'. (The actions that may be required include importing the TPM Owner Authorization value into the system, calling the Win32_Tpm WMI method for provisioning the TPM and specifying TRUE for either 'ForceClear_Allowed' or 'PhysicalPresencePrompts_Allowed' (as indicated by the value returned in the Additional Information), or enabling the TPM in the system BIOS.) |
TBS_E_PPI_FUNCTION_UNSUPPORTED 0x80284014 |
The Physical Presence Interface of this firmware does not support the requested method. |
TBS_E_OWNERAUTH_NOT_FOUND 0x80284015 |
The requested TPM OwnerAuth value was not found. |
TBS_E_PROVISIONING_INCOMPLETE 0x80284016 |
The TPM provisioning did not complete. For more information on completing the provisioning, call the Win32_Tpm WMI method for provisioning the TPM ('Provision') and check the returned Information. |
TPMAPI_E_INVALID_STATE 0x80290100 |
The command buffer is not in the correct state. |
TPMAPI_E_NOT_ENOUGH_DATA 0x80290101 |
The command buffer does not contain enough data to satisfy the request. |
TPMAPI_E_TOO_MUCH_DATA 0x80290102 |
The command buffer cannot contain any more data. |
TPMAPI_E_INVALID_OUTPUT_POINTER 0x80290103 |
One or more output parameters was NULL or invalid. |
TPMAPI_E_INVALID_PARAMETER 0x80290104 |
One or more input parameters is invalid. |
TPMAPI_E_OUT_OF_MEMORY 0x80290105 |
Not enough memory was available to satisfy the request. |
TPMAPI_E_BUFFER_TOO_SMALL 0x80290106 |
The specified buffer was too small. |
TPMAPI_E_INTERNAL_ERROR 0x80290107 |
An internal error was detected. |
TPMAPI_E_ACCESS_DENIED 0x80290108 |
The caller does not have the appropriate rights to perform the requested operation. |
TPMAPI_E_AUTHORIZATION_FAILED 0x80290109 |
The specified authorization information was invalid. |
TPMAPI_E_INVALID_CONTEXT_HANDLE 0x8029010A |
The specified context handle was not valid. |
TPMAPI_E_TBS_COMMUNICATION_ERROR 0x8029010B |
An error occurred while communicating with the TBS. |
TPMAPI_E_TPM_COMMAND_ERROR 0x8029010C |
The TPM returned an unexpected result. |
TPMAPI_E_MESSAGE_TOO_LARGE 0x8029010D |
The message was too large for the encoding scheme. |
TPMAPI_E_INVALID_ENCODING 0x8029010E |
The encoding in the blob was not recognized. |
TPMAPI_E_INVALID_KEY_SIZE 0x8029010F |
The key size is not valid. |
TPMAPI_E_ENCRYPTION_FAILED 0x80290110 |
The encryption operation failed. |
TPMAPI_E_INVALID_KEY_PARAMS 0x80290111 |
The key parameters structure was not valid |
TPMAPI_E_INVALID_MIGRATION_AUTHORIZATION_BLOB 0x80290112 |
The requested supplied data does not appear to be a valid migration authorization blob. |
TPMAPI_E_INVALID_PCR_INDEX 0x80290113 |
The specified PCR index was invalid |
TPMAPI_E_INVALID_DELEGATE_BLOB 0x80290114 |
The data given does not appear to be a valid delegate blob. |
TPMAPI_E_INVALID_CONTEXT_PARAMS 0x80290115 |
One or more of the specified context parameters was not valid. |
TPMAPI_E_INVALID_KEY_BLOB 0x80290116 |
The data given does not appear to be a valid key blob |
TPMAPI_E_INVALID_PCR_DATA 0x80290117 |
The specified PCR data was invalid. |
TPMAPI_E_INVALID_OWNER_AUTH 0x80290118 |
The format of the owner auth data was invalid. |
TPMAPI_E_FIPS_RNG_CHECK_FAILED 0x80290119 |
The random number generated did not pass FIPS RNG check. |
TPMAPI_E_EMPTY_TCG_LOG 0x8029011A |
The TCG Event Log does not contain any data. |
TPMAPI_E_INVALID_TCG_LOG_ENTRY 0x8029011B |
An entry in the TCG Event Log was invalid. |
TPMAPI_E_TCG_SEPARATOR_ABSENT 0x8029011C |
A TCG Separator was not found. |
TPMAPI_E_TCG_INVALID_DIGEST_ENTRY 0x8029011D |
A digest value in a TCG Log entry did not match hashed data. |
TPMAPI_E_POLICY_DENIES_OPERATION 0x8029011E |
The requested operation was blocked by current TPM policy. Please contact your system administrator for assistance. |
TBSIMP_E_BUFFER_TOO_SMALL 0x80290200 |
The specified buffer was too small. |
TBSIMP_E_CLEANUP_FAILED 0x80290201 |
The context could not be cleaned up. |
TBSIMP_E_INVALID_CONTEXT_HANDLE 0x80290202 |
The specified context handle is invalid. |
TBSIMP_E_INVALID_CONTEXT_PARAM 0x80290203 |
An invalid context parameter was specified. |
TBSIMP_E_TPM_ERROR 0x80290204 |
An error occurred while communicating with the TPM |
TBSIMP_E_HASH_BAD_KEY 0x80290205 |
No entry with the specified key was found. |
TBSIMP_E_DUPLICATE_VHANDLE 0x80290206 |
The specified virtual handle matches a virtual handle already in use. |
TBSIMP_E_INVALID_OUTPUT_POINTER 0x80290207 |
The pointer to the returned handle location was NULL or invalid |
TBSIMP_E_INVALID_PARAMETER 0x80290208 |
One or more parameters is invalid |
TBSIMP_E_RPC_INIT_FAILED 0x80290209 |
The RPC subsystem could not be initialized. |
TBSIMP_E_SCHEDULER_NOT_RUNNING 0x8029020A |
The TBS scheduler is not running. |
TBSIMP_E_COMMAND_CANCELED 0x8029020B |
The command was canceled. |
TBSIMP_E_OUT_OF_MEMORY 0x8029020C |
There was not enough memory to fulfill the request |
TBSIMP_E_LIST_NO_MORE_ITEMS 0x8029020D |
The specified list is empty, or the iteration has reached the end of the list. |
TBSIMP_E_LIST_NOT_FOUND 0x8029020E |
The specified item was not found in the list. |
TBSIMP_E_NOT_ENOUGH_SPACE 0x8029020F |
The TPM does not have enough space to load the requested resource. |
TBSIMP_E_NOT_ENOUGH_TPM_CONTEXTS 0x80290210 |
There are too many TPM contexts in use. |
TBSIMP_E_COMMAND_FAILED 0x80290211 |
The TPM command failed. |
TBSIMP_E_UNKNOWN_ORDINAL 0x80290212 |
The TBS does not recognize the specified ordinal. |
TBSIMP_E_RESOURCE_EXPIRED 0x80290213 |
The requested resource is no longer available. |
TBSIMP_E_INVALID_RESOURCE 0x80290214 |
The resource type did not match. |
TBSIMP_E_NOTHING_TO_UNLOAD 0x80290215 |
No resources can be unloaded. |
TBSIMP_E_HASH_TABLE_FULL 0x80290216 |
No new entries can be added to the hash table. |
TBSIMP_E_TOO_MANY_TBS_CONTEXTS 0x80290217 |
A new TBS context could not be created because there are too many open contexts. |
TBSIMP_E_TOO_MANY_RESOURCES 0x80290218 |
A new virtual resource could not be created because there are too many open virtual resources. |
TBSIMP_E_PPI_NOT_SUPPORTED 0x80290219 |
The physical presence interface is not supported. |
TBSIMP_E_TPM_INCOMPATIBLE 0x8029021A |
TBS is not compatible with the version of TPM found on the system. |
TBSIMP_E_NO_EVENT_LOG 0x8029021B |
No TCG event log is available. |
TPM_E_PPI_ACPI_FAILURE 0x80290300 |
A general error was detected when attempting to acquire the BIOS's response to a Physical Presence command. |
TPM_E_PPI_USER_ABORT 0x80290301 |
The user failed to confirm the TPM operation request. |
TPM_E_PPI_BIOS_FAILURE 0x80290302 |
The BIOS failure prevented the successful execution of the requested TPM operation (e.g. invalid TPM operation request, BIOS communication error with the TPM). |
TPM_E_PPI_NOT_SUPPORTED 0x80290303 |
The BIOS does not support the physical presence interface. |
TPM_E_PPI_BLOCKED_IN_BIOS 0x80290304 |
The Physical Presence command was blocked by current BIOS settings. The system owner may be able to reconfigure the BIOS settings to allow the command. |
TPM_E_PCP_ERROR_MASK 0x80290400 |
This is an error mask to convert Platform Crypto Provider errors to win errors. |
TPM_E_PCP_DEVICE_NOT_READY 0x80290401 |
The Platform Crypto Device is currently not ready. It needs to be fully provisioned to be operational. |
TPM_E_PCP_INVALID_HANDLE 0x80290402 |
The handle provided to the Platform Crypto Provider is invalid. |
TPM_E_PCP_INVALID_PARAMETER 0x80290403 |
A parameter provided to the Platform Crypto Provider is invalid. |
TPM_E_PCP_FLAG_NOT_SUPPORTED 0x80290404 |
A provided flag to the Platform Crypto Provider is not supported. |
TPM_E_PCP_NOT_SUPPORTED 0x80290405 |
The requested operation is not supported by this Platform Crypto Provider. |
TPM_E_PCP_BUFFER_TOO_SMALL 0x80290406 |
The buffer is too small to contain all data. No information has been written to the buffer. |
TPM_E_PCP_INTERNAL_ERROR 0x80290407 |
An unexpected internal error has occurred in the Platform Crypto Provider. |
TPM_E_PCP_AUTHENTICATION_FAILED 0x80290408 |
The authorization to use a provider object has failed. |
TPM_E_PCP_AUTHENTICATION_IGNORED 0x80290409 |
The Platform Crypto Device has ignored the authorization for the provider object, to mitigate against a dictionary attack. |
TPM_E_PCP_POLICY_NOT_FOUND 0x8029040A |
The referenced policy was not found. |
TPM_E_PCP_PROFILE_NOT_FOUND 0x8029040B |
The referenced profile was not found. |
TPM_E_PCP_VALIDATION_FAILED 0x8029040C |
The validation was not successful. |
PLA_E_DCS_NOT_FOUND 0x80300002 |
Data Collector Set was not found. |
PLA_E_DCS_IN_USE 0x803000AA |
The Data Collector Set or one of its dependencies is already in use. |
PLA_E_TOO_MANY_FOLDERS 0x80300045 |
Unable to start Data Collector Set because there are too many folders. |
PLA_E_NO_MIN_DISK 0x80300070 |
Not enough free disk space to start Data Collector Set. |
PLA_E_DCS_ALREADY_EXISTS 0x803000B7 |
Data Collector Set already exists. |
PLA_S_PROPERTY_IGNORED 0x00300100 |
Property value will be ignored. |
PLA_E_PROPERTY_CONFLICT 0x80300101 |
Property value conflict. |
PLA_E_DCS_SINGLETON_REQUIRED 0x80300102 |
The current configuration for this Data Collector Set requires that it contain exactly one Data Collector. |
PLA_E_CREDENTIALS_REQUIRED 0x80300103 |
A user account is required in order to commit the current Data Collector Set properties. |
PLA_E_DCS_NOT_RUNNING 0x80300104 |
Data Collector Set is not running. |
PLA_E_CONFLICT_INCL_EXCL_API 0x80300105 |
A conflict was detected in the list of include/exclude APIs. Do not specify the same API in both the include list and the exclude list. |
PLA_E_NETWORK_EXE_NOT_VALID 0x80300106 |
The executable path you have specified refers to a network share or UNC path. |
PLA_E_EXE_ALREADY_CONFIGURED 0x80300107 |
The executable path you have specified is already configured for API tracing. |
PLA_E_EXE_PATH_NOT_VALID 0x80300108 |
The executable path you have specified does not exist. Verify that the specified path is correct. |
PLA_E_DC_ALREADY_EXISTS 0x80300109 |
Data Collector already exists. |
PLA_E_DCS_START_WAIT_TIMEOUT 0x8030010A |
The wait for the Data Collector Set start notification has timed out. |
PLA_E_DC_START_WAIT_TIMEOUT 0x8030010B |
The wait for the Data Collector to start has timed out. |
PLA_E_REPORT_WAIT_TIMEOUT 0x8030010C |
The wait for the report generation tool to finish has timed out. |
PLA_E_NO_DUPLICATES 0x8030010D |
Duplicate items are not allowed. |
PLA_E_EXE_FULL_PATH_REQUIRED 0x8030010E |
When specifying the executable that you want to trace, you must specify a full path to the executable and not just a filename. |
PLA_E_INVALID_SESSION_NAME 0x8030010F |
The session name provided is invalid. |
PLA_E_PLA_CHANNEL_NOT_ENABLED 0x80300110 |
The Event Log channel Microsoft-Windows-Diagnosis-PLA/Operational must be enabled to perform this operation. |
PLA_E_TASKSCHED_CHANNEL_NOT_ENABLED 0x80300111 |
The Event Log channel Microsoft-Windows-TaskScheduler must be enabled to perform this operation. |
PLA_E_RULES_MANAGER_FAILED 0x80300112 |
The execution of the Rules Manager failed. |
PLA_E_CABAPI_FAILURE 0x80300113 |
An error occurred while attempting to compress or extract the data. |
FVE_E_LOCKED_VOLUME 0x80310000 |
This drive is locked by BitLocker Drive Encryption. You must unlock this drive from Control Panel. |
FVE_E_NOT_ENCRYPTED 0x80310001 |
The drive is not encrypted. |
FVE_E_NO_TPM_BIOS 0x80310002 |
The BIOS did not correctly communicate with the TPM. Contact the computer manufacturer for BIOS upgrade instructions. |
FVE_E_NO_MBR_METRIC 0x80310003 |
The BIOS did not correctly communicate with the master boot record (MBR). Contact the computer manufacturer for BIOS upgrade instructions. |
FVE_E_NO_BOOTSECTOR_METRIC 0x80310004 |
A required TPM measurement is missing. If there is a bootable CD or DVD in your computer, remove it, restart the computer, and turn on BitLocker again. If the problem persists, ensure the master boot record is up to date. |
FVE_E_NO_BOOTMGR_METRIC 0x80310005 |
The boot sector of this drive is not compatible with BitLocker Drive Encryption. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot manager (BOOTMGR). |
FVE_E_WRONG_BOOTMGR 0x80310006 |
The boot manager of this operating system is not compatible with BitLocker Drive Encryption. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot manager (BOOTMGR). |
FVE_E_SECURE_KEY_REQUIRED 0x80310007 |
At least one secure key protector is required for this operation to be performed. |
FVE_E_NOT_ACTIVATED 0x80310008 |
BitLocker Drive Encryption is not enabled on this drive. Turn on BitLocker. |
FVE_E_ACTION_NOT_ALLOWED 0x80310009 |
BitLocker Drive Encryption cannot perform requested action. This condition may occur when two requests are issued at the same time. Wait a few moments and then try the action again. |
FVE_E_AD_SCHEMA_NOT_INSTALLED 0x8031000A |
The Active Directory Domain Services forest does not contain the required attributes and classes to host BitLocker Drive Encryption or TPM information. Contact your domain administrator to verify that any required BitLocker Active Directory schema extensions have been installed. |
FVE_E_AD_INVALID_DATATYPE 0x8031000B |
The type of the data obtained from Active Directory was not expected. The BitLocker recovery information may be missing or corrupted. |
FVE_E_AD_INVALID_DATASIZE 0x8031000C |
The size of the data obtained from Active Directory was not expected. The BitLocker recovery information may be missing or corrupted. |
FVE_E_AD_NO_VALUES 0x8031000D |
The attribute read from Active Directory does not contain any values. The BitLocker recovery information may be missing or corrupted. |
FVE_E_AD_ATTR_NOT_SET 0x8031000E |
The attribute was not set. Verify that you are logged on with a domain account that has the ability to write information to Active Directory objects. |
FVE_E_AD_GUID_NOT_FOUND 0x8031000F |
The specified attribute cannot be found in Active Directory Domain Services. Contact your domain administrator to verify that any required BitLocker Active Directory schema extensions have been installed. |
FVE_E_BAD_INFORMATION 0x80310010 |
The BitLocker metadata for the encrypted drive is not valid. You can attempt to repair the drive to restore access. |
FVE_E_TOO_SMALL 0x80310011 |
The drive cannot be encrypted because it does not have enough free space. Delete any unnecessary data on the drive to create additional free space and then try again. |
FVE_E_SYSTEM_VOLUME 0x80310012 |
The drive cannot be encrypted because it contains system boot information. Create a separate partition for use as the system drive that contains the boot information and a second partition for use as the operating system drive and then encrypt the operating system drive. |
FVE_E_FAILED_WRONG_FS 0x80310013 |
The drive cannot be encrypted because the file system is not supported. |
FVE_E_BAD_PARTITION_SIZE 0x80310014 |
The file system size is larger than the partition size in the partition table. This drive may be corrupt or may have been tampered with. To use it with BitLocker, you must reformat the partition. |
FVE_E_NOT_SUPPORTED 0x80310015 |
This drive cannot be encrypted. |
FVE_E_BAD_DATA 0x80310016 |
The data is not valid. |
FVE_E_VOLUME_NOT_BOUND 0x80310017 |
The data drive specified is not set to automatically unlock on the current computer and cannot be unlocked automatically. |
FVE_E_TPM_NOT_OWNED 0x80310018 |
You must initialize the TPM before you can use BitLocker Drive Encryption. |
FVE_E_NOT_DATA_VOLUME 0x80310019 |
The operation attempted cannot be performed on an operating system drive. |
FVE_E_AD_INSUFFICIENT_BUFFER 0x8031001A |
The buffer supplied to a function was insufficient to contain the returned data. Increase the buffer size before running the function again. |
FVE_E_CONV_READ 0x8031001B |
A read operation failed while converting the drive. The drive was not converted. Please re-enable BitLocker. |
FVE_E_CONV_WRITE 0x8031001C |
A write operation failed while converting the drive. The drive was not converted. Please re-enable BitLocker. |
FVE_E_KEY_REQUIRED 0x8031001D |
One or more BitLocker key protectors are required. You cannot delete the last key on this drive. |
FVE_E_CLUSTERING_NOT_SUPPORTED 0x8031001E |
Cluster configurations are not supported by BitLocker Drive Encryption. |
FVE_E_VOLUME_BOUND_ALREADY 0x8031001F |
The drive specified is already configured to be automatically unlocked on the current computer. |
FVE_E_OS_NOT_PROTECTED 0x80310020 |
The operating system drive is not protected by BitLocker Drive Encryption. |
FVE_E_PROTECTION_DISABLED 0x80310021 |
BitLocker Drive Encryption has been suspended on this drive. All BitLocker key protectors configured for this drive are effectively disabled, and the drive will be automatically unlocked using an unencrypted (clear) key. |
FVE_E_RECOVERY_KEY_REQUIRED 0x80310022 |
The drive you are attempting to lock does not have any key protectors available for encryption because BitLocker protection is currently suspended. Re-enable BitLocker to lock this drive. |
FVE_E_FOREIGN_VOLUME 0x80310023 |
BitLocker cannot use the TPM to protect a data drive. TPM protection can only be used with the operating system drive. |
FVE_E_OVERLAPPED_UPDATE 0x80310024 |
The BitLocker metadata for the encrypted drive cannot be updated because it was locked for updating by another process. Please try this process again. |
FVE_E_TPM_SRK_AUTH_NOT_ZERO 0x80310025 |
The authorization data for the storage root key (SRK) of the TPM is not zero and is therefore incompatible with BitLocker. Please initialize the TPM before attempting to use it with BitLocker. |
FVE_E_FAILED_SECTOR_SIZE 0x80310026 |
The drive encryption algorithm cannot be used on this sector size. |
FVE_E_FAILED_AUTHENTICATION 0x80310027 |
The drive cannot be unlocked with the key provided. Confirm that you have provided the correct key and try again. |
FVE_E_NOT_OS_VOLUME 0x80310028 |
The drive specified is not the operating system drive. |
FVE_E_AUTOUNLOCK_ENABLED 0x80310029 |
BitLocker Drive Encryption cannot be turned off on the operating system drive until the auto unlock feature has been disabled for the fixed data drives and removable data drives associated with this computer. |
FVE_E_WRONG_BOOTSECTOR 0x8031002A |
The system partition boot sector does not perform TPM measurements. Use the Bootrec.exe tool in the Windows Recovery Environment to update or repair the boot sector. |
FVE_E_WRONG_SYSTEM_FS 0x8031002B |
BitLocker Drive Encryption operating system drives must be formatted with the NTFS file system in order to be encrypted. Convert the drive to NTFS, and then turn on BitLocker. |
FVE_E_POLICY_PASSWORD_REQUIRED 0x8031002C |
Group Policy settings require that a recovery password be specified before encrypting the drive. |
FVE_E_CANNOT_SET_FVEK_ENCRYPTED 0x8031002D |
The drive encryption algorithm and key cannot be set on a previously encrypted drive. To encrypt this drive with BitLocker Drive Encryption, remove the previous encryption and then turn on BitLocker. |
FVE_E_CANNOT_ENCRYPT_NO_KEY 0x8031002E |
BitLocker Drive Encryption cannot encrypt the specified drive because an encryption key is not available. Add a key protector to encrypt this drive. |
FVE_E_BOOTABLE_CDDVD 0x80310030 |
BitLocker Drive Encryption detected bootable media (CD or DVD) in the computer. Remove the media and restart the computer before configuring BitLocker. |
FVE_E_PROTECTOR_EXISTS 0x80310031 |
This key protector cannot be added. Only one key protector of this type is allowed for this drive. |
FVE_E_RELATIVE_PATH 0x80310032 |
The recovery password file was not found because a relative path was specified. Recovery passwords must be saved to a fully qualified path. Environment variables configured on the computer can be used in the path. |
FVE_E_PROTECTOR_NOT_FOUND 0x80310033 |
The specified key protector was not found on the drive. Try another key protector. |
FVE_E_INVALID_KEY_FORMAT 0x80310034 |
The recovery key provided is corrupt and cannot be used to access the drive. An alternative recovery method, such as recovery password, a data recovery agent, or a backup version of the recovery key must be used to recover access to the drive. |
FVE_E_INVALID_PASSWORD_FORMAT 0x80310035 |
The format of the recovery password provided is invalid. BitLocker recovery passwords are 48 digits. Verify that the recovery password is in the correct format and then try again. |
FVE_E_FIPS_RNG_CHECK_FAILED 0x80310036 |
The random number generator check test failed. |
FVE_E_FIPS_PREVENTS_RECOVERY_PASSWORD 0x80310037 |
The Group Policy setting requiring FIPS compliance prevents a local recovery password from being generated or used by BitLocker Drive Encryption. When operating in FIPS-compliant mode, BitLocker recovery options can be either a recovery key stored on a USB drive or recovery through a data recovery agent. |
FVE_E_FIPS_PREVENTS_EXTERNAL_KEY_EXPORT 0x80310038 |
The Group Policy setting requiring FIPS compliance prevents the recovery password from being saved to Active Directory. When operating in FIPS-compliant mode, BitLocker recovery options can be either a recovery key stored on a USB drive or recovery through a data recovery agent. Check your Group Policy settings configuration. |
FVE_E_NOT_DECRYPTED 0x80310039 |
The drive must be fully decrypted to complete this operation. |
FVE_E_INVALID_PROTECTOR_TYPE 0x8031003A |
The key protector specified cannot be used for this operation. |
FVE_E_NO_PROTECTORS_TO_TEST 0x8031003B |
No key protectors exist on the drive to perform the hardware test. |
FVE_E_KEYFILE_NOT_FOUND 0x8031003C |
The BitLocker startup key or recovery password cannot be found on the USB device. Verify that you have the correct USB device, that the USB device is plugged into the computer on an active USB port, restart the computer, and then try again. If the problem persists, contact the computer manufacturer for BIOS upgrade instructions. |
FVE_E_KEYFILE_INVALID 0x8031003D |
The BitLocker startup key or recovery password file provided is corrupt or invalid. Verify that you have the correct startup key or recovery password file and try again. |
FVE_E_KEYFILE_NO_VMK 0x8031003E |
The BitLocker encryption key cannot be obtained from the startup key or recovery password. Verify that you have the correct startup key or recovery password and try again. |
FVE_E_TPM_DISABLED 0x8031003F |
The TPM is disabled. The TPM must be enabled, initialized, and have valid ownership before it can be used with BitLocker Drive Encryption. |
FVE_E_NOT_ALLOWED_IN_SAFE_MODE 0x80310040 |
The BitLocker configuration of the specified drive cannot be managed because this computer is currently operating in Safe Mode. While in Safe Mode, BitLocker Drive Encryption can only be used for recovery purposes. |
FVE_E_TPM_INVALID_PCR 0x80310041 |
The TPM was not able to unlock the drive because the system boot information has changed or a PIN was not provided correctly. Verify that the drive has not been tampered with and that changes to the system boot information were caused by a trusted source. After verifying that the drive is safe to access, use the BitLocker recovery console to unlock the drive and then suspend and resume BitLocker to update system boot information that BitLocker associates with this drive. |
FVE_E_TPM_NO_VMK 0x80310042 |
The BitLocker encryption key cannot be obtained from the TPM. |
FVE_E_PIN_INVALID 0x80310043 |
The BitLocker encryption key cannot be obtained from the TPM and PIN. |
FVE_E_AUTH_INVALID_APPLICATION 0x80310044 |
A boot application has changed since BitLocker Drive Encryption was enabled. |
FVE_E_AUTH_INVALID_CONFIG 0x80310045 |
The Boot Configuration Data (BCD) settings have changed since BitLocker Drive Encryption was enabled. |
FVE_E_FIPS_DISABLE_PROTECTION_NOT_ALLOWED 0x80310046 |
The Group Policy setting requiring FIPS compliance prohibits the use of unencrypted keys, which prevents BitLocker from being suspended on this drive. Please contact your domain administrator for more information. |
FVE_E_FS_NOT_EXTENDED 0x80310047 |
This drive cannot be encrypted by BitLocker Drive Encryption because the file system does not extend to the end of the drive. Repartition this drive and then try again. |
FVE_E_FIRMWARE_TYPE_NOT_SUPPORTED 0x80310048 |
BitLocker Drive Encryption cannot be enabled on the operating system drive. Contact the computer manufacturer for BIOS upgrade instructions. |
FVE_E_NO_LICENSE 0x80310049 |
This version of Windows does not include BitLocker Drive Encryption. To use BitLocker Drive Encryption, please upgrade the operating system. |
FVE_E_NOT_ON_STACK 0x8031004A |
BitLocker Drive Encryption cannot be used because critical BitLocker system files are missing or corrupted. Use Windows Startup Repair to restore these files to your computer. |
FVE_E_FS_MOUNTED 0x8031004B |
The drive cannot be locked when the drive is in use. |
FVE_E_TOKEN_NOT_IMPERSONATED 0x8031004C |
The access token associated with the current thread is not an impersonated token. |
FVE_E_DRY_RUN_FAILED 0x8031004D |
The BitLocker encryption key cannot be obtained. Verify that the TPM is enabled and ownership has been taken. If this computer does not have a TPM, verify that the USB drive is inserted and available. |
FVE_E_REBOOT_REQUIRED 0x8031004E |
You must restart your computer before continuing with BitLocker Drive Encryption. |
FVE_E_DEBUGGER_ENABLED 0x8031004F |
Drive encryption cannot occur while boot debugging is enabled. Use the bcdedit command-line tool to turn off boot debugging. |
FVE_E_RAW_ACCESS 0x80310050 |
No action was taken as BitLocker Drive Encryption is in raw access mode. |
FVE_E_RAW_BLOCKED 0x80310051 |
BitLocker Drive Encryption cannot enter raw access mode for this drive because the drive is currently in use. |
FVE_E_BCD_APPLICATIONS_PATH_INCORRECT 0x80310052 |
The path specified in the Boot Configuration Data (BCD) for a BitLocker Drive Encryption integrity-protected application is incorrect. Please verify and correct your BCD settings and try again. |
FVE_E_NOT_ALLOWED_IN_VERSION 0x80310053 |
BitLocker Drive Encryption can only be used for limited provisioning or recovery purposes when the computer is running in pre-installation or recovery environments. |
FVE_E_NO_AUTOUNLOCK_MASTER_KEY 0x80310054 |
The auto-unlock master key was not available from the operating system drive. |
FVE_E_MOR_FAILED 0x80310055 |
The system firmware failed to enable clearing of system memory when the computer was restarted. |
FVE_E_HIDDEN_VOLUME 0x80310056 |
The hidden drive cannot be encrypted. |
FVE_E_TRANSIENT_STATE 0x80310057 |
BitLocker encryption keys were ignored because the drive was in a transient state. |
FVE_E_PUBKEY_NOT_ALLOWED 0x80310058 |
Public key based protectors are not allowed on this drive. |
FVE_E_VOLUME_HANDLE_OPEN 0x80310059 |
BitLocker Drive Encryption is already performing an operation on this drive. Please complete all operations before continuing. |
FVE_E_NO_FEATURE_LICENSE 0x8031005A |
This version of Windows does not support this feature of BitLocker Drive Encryption. To use this feature, upgrade the operating system. |
FVE_E_INVALID_STARTUP_OPTIONS 0x8031005B |
The Group Policy settings for BitLocker startup options are in conflict and cannot be applied. Contact your system administrator for more information. |
FVE_E_POLICY_RECOVERY_PASSWORD_NOT_ALLOWED 0x8031005C |
Group policy settings do not permit the creation of a recovery password. |
FVE_E_POLICY_RECOVERY_PASSWORD_REQUIRED 0x8031005D |
Group policy settings require the creation of a recovery password. |
FVE_E_POLICY_RECOVERY_KEY_NOT_ALLOWED 0x8031005E |
Group policy settings do not permit the creation of a recovery key. |
FVE_E_POLICY_RECOVERY_KEY_REQUIRED 0x8031005F |
Group policy settings require the creation of a recovery key. |
FVE_E_POLICY_STARTUP_PIN_NOT_ALLOWED 0x80310060 |
Group policy settings do not permit the use of a PIN at startup. Please choose a different BitLocker startup option. |
FVE_E_POLICY_STARTUP_PIN_REQUIRED 0x80310061 |
Group policy settings require the use of a PIN at startup. Please choose this BitLocker startup option. |
FVE_E_POLICY_STARTUP_KEY_NOT_ALLOWED 0x80310062 |
Group policy settings do not permit the use of a startup key. Please choose a different BitLocker startup option. |
FVE_E_POLICY_STARTUP_KEY_REQUIRED 0x80310063 |
Group policy settings require the use of a startup key. Please choose this BitLocker startup option. |
FVE_E_POLICY_STARTUP_PIN_KEY_NOT_ALLOWED0x80310064 |
Group policy settings do not permit the use of a startup key and PIN. Please choose a different BitLocker startup option. |
FVE_E_POLICY_STARTUP_PIN_KEY_REQUIRED 0x80310065 |
Group policy settings require the use of a startup key and PIN. Please choose this BitLocker startup option. |
FVE_E_POLICY_STARTUP_TPM_NOT_ALLOWED 0x80310066 |
Group policy does not permit the use of TPM-only at startup. Please choose a different BitLocker startup option. |
FVE_E_POLICY_STARTUP_TPM_REQUIRED 0x80310067 |
Group policy settings require the use of TPM-only at startup. Please choose this BitLocker startup option. |
FVE_E_POLICY_INVALID_PIN_LENGTH 0x80310068 |
The PIN provided does not meet minimum or maximum length requirements. |
FVE_E_KEY_PROTECTOR_NOT_SUPPORTED 0x80310069 |
The key protector is not supported by the version of BitLocker Drive Encryption currently on the drive. Upgrade the drive to add the key protector. |
FVE_E_POLICY_PASSPHRASE_NOT_ALLOWED 0x8031006A |
Group policy settings do not permit the creation of a password. |
FVE_E_POLICY_PASSPHRASE_REQUIRED 0x8031006B |
Group policy settings require the creation of a password. |
FVE_E_FIPS_PREVENTS_PASSPHRASE 0x8031006C |
The group policy setting requiring FIPS compliance prevented the password from being generated or used. Please contact your domain administrator for more information. |
FVE_E_OS_VOLUME_PASSPHRASE_NOT_ALLOWED 0x8031006D |
A password cannot be added to the operating system drive. |
FVE_E_INVALID_BITLOCKER_OID 0x8031006E |
The BitLocker object identifier (OID) on the drive appears to be invalid or corrupt. Use manage-BDE to reset the OID on this drive. |
FVE_E_VOLUME_TOO_SMALL 0x8031006F |
The drive is too small to be protected using BitLocker Drive Encryption. |
FVE_E_DV_NOT_SUPPORTED_ON_FS 0x80310070 |
The selected discovery drive type is incompatible with the file system on the drive. BitLocker To Go discovery drives must be created on FAT formatted drives. |
FVE_E_DV_NOT_ALLOWED_BY_GP 0x80310071 |
The selected discovery drive type is not allowed by the computer's Group Policy settings. Verify that Group Policy settings allow the creation of discovery drives for use with BitLocker To Go. |
FVE_E_POLICY_USER_CERTIFICATE_NOT_ALLOWED 0x80310072 |
Group Policy settings do not permit user certificates such as smart cards to be used with BitLocker Drive Encryption. |
FVE_E_POLICY_USER_CERTIFICATE_REQUIRED 0x80310073 |
Group Policy settings require that you have a valid user certificate, such as a smart card, to be used with BitLocker Drive Encryption. |
FVE_E_POLICY_USER_CERT_MUST_BE_HW 0x80310074 |
Group Policy settings requires that you use a smart card-based key protector with BitLocker Drive Encryption. |
FVE_E_POLICY_USER_CONFIGURE_FDV_AUTOUNLOCK_NOT_ALLOWED 0x80310075 |
Group Policy settings do not permit BitLocker-protected fixed data drives to be automatically unlocked. |
FVE_E_POLICY_USER_CONFIGURE_RDV_AUTOUNLOCK_NOT_ALLOWED 0x80310076 |
Group Policy settings do not permit BitLocker-protected removable data drives to be automatically unlocked. |
FVE_E_POLICY_USER_CONFIGURE_RDV_NOT_ALLOWED 0x80310077 |
Group Policy settings do not permit you to configure BitLocker Drive Encryption on removable data drives. |
FVE_E_POLICY_USER_ENABLE_RDV_NOT_ALLOWED 0x80310078 |
Group Policy settings do not permit you to turn on BitLocker Drive Encryption on removable data drives. Please contact your system administrator if you need to turn on BitLocker. |
FVE_E_POLICY_USER_DISABLE_RDV_NOT_ALLOWED 0x80310079 |
Group Policy settings do not permit turning off BitLocker Drive Encryption on removable data drives. Please contact your system administrator if you need to turn off BitLocker. |
FVE_E_POLICY_INVALID_PASSPHRASE_LENGTH 0x80310080 |
Your password does not meet minimum password length requirements. By default, passwords must be at least 8 characters in length. Check with your system administrator for the password length requirement in your organization. |
FVE_E_POLICY_PASSPHRASE_TOO_SIMPLE 0x80310081 |
Your password does not meet the complexity requirements set by your system administrator. Try adding upper and lowercase characters, numbers, and symbols. |
FVE_E_RECOVERY_PARTITION 0x80310082 |
This drive cannot be encrypted because it is reserved for Windows System Recovery Options. |
FVE_E_POLICY_CONFLICT_FDV_RK_OFF_AUK_ON 0x80310083 |
BitLocker Drive Encryption cannot be applied to this drive because of conflicting Group Policy settings. BitLocker cannot be configured to automatically unlock fixed data drives when user recovery options are disabled. If you want BitLocker-protected fixed data drives to be automatically unlocked after key validation has occurred, please ask your system administrator to resolve the settings conflict before enabling BitLocker. |
FVE_E_POLICY_CONFLICT_RDV_RK_OFF_AUK_ON 0x80310084 |
BitLocker Drive Encryption cannot be applied to this drive because of conflicting Group Policy settings. BitLocker cannot be configured to automatically unlock removable data drives when user recovery option are disabled. If you want BitLocker-protected removable data drives to be automatically unlocked after key validation has occurred, please ask your system administrator to resolve the settings conflict before enabling BitLocker. |
FVE_E_NON_BITLOCKER_OID 0x80310085 |
The Enhanced Key Usage (EKU) attribute of the specified certificate does not permit it to be used for BitLocker Drive Encryption. BitLocker does not require that a certificate have an EKU attribute, but if one is configured it must be set to an object identifier (OID) that matches the OID configured for BitLocker. |
FVE_E_POLICY_PROHIBITS_SELFSIGNED 0x80310086 |
BitLocker Drive Encryption cannot be applied to this drive as currently configured because of Group Policy settings. The certificate you provided for drive encryption is self-signed. Current Group Policy settings do not permit the use of self-signed certificates. Obtain a new certificate from your certification authority before attempting to enable BitLocker. |
FVE_E_POLICY_CONFLICT_RO_AND_STARTUP_KEY_REQUIRED 0x80310087 |
BitLocker Encryption cannot be applied to this drive because of conflicting Group Policy settings. When write access to drives not protected by BitLocker is denied, the use of a USB startup key cannot be required. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker. |
FVE_E_CONV_RECOVERY_FAILED 0x80310088 |
BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on operating system drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker. |
FVE_E_VIRTUALIZED_SPACE_TOO_BIG 0x80310089 |
The requested virtualization size is too big. |
FVE_E_POLICY_CONFLICT_OSV_RP_OFF_ADB_ON 0x80310090 |
BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on operating system drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker. |
FVE_E_POLICY_CONFLICT_FDV_RP_OFF_ADB_ON 0x80310091 |
BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on fixed data drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker. |
FVE_E_POLICY_CONFLICT_RDV_RP_OFF_ADB_ON 0x80310092 |
BitLocker Drive Encryption cannot be applied to this drive because there are conflicting Group Policy settings for recovery options on removable data drives. Storing recovery information to Active Directory Domain Services cannot be required when the generation of recovery passwords is not permitted. Please have your system administrator resolve these policy conflicts before attempting to enable BitLocker. |
FVE_E_NON_BITLOCKER_KU 0x80310093 |
The Key Usage (KU) attribute of the specified certificate does not permit it to be used for BitLocker Drive Encryption. BitLocker does not require that a certificate have a KU attribute, but if one is configured it must be set to either Key Encipherment or Key Agreement. |
FVE_E_PRIVATEKEY_AUTH_FAILED 0x80310094 |
The private key associated with the specified certificate cannot be authorized. The private key authorization was either not provided or the provided authorization was invalid. |
FVE_E_REMOVAL_OF_DRA_FAILED 0x80310095 |
Removal of the data recovery agent certificate must be done using the Certificates snap-in. |
FVE_E_OPERATION_NOT_SUPPORTED_ON_VISTA_VOLUME 0x80310096 |
This drive was encrypted using the version of BitLocker Drive Encryption included with Windows Vista and Windows Server 2008 which does not support organizational identifiers. To specify organizational identifiers for this drive upgrade the drive encryption to the latest version using the "manage-bde -upgrade" command. |
FVE_E_CANT_LOCK_AUTOUNLOCK_ENABLED_VOLUME 0x80310097 |
The drive cannot be locked because it is automatically unlocked on this computer. Remove the automatic unlock protector to lock this drive. |
FVE_E_FIPS_HASH_KDF_NOT_ALLOWED 0x80310098 |
The default BitLocker Key Derivation Function SP800-56A for ECC smart cards is not supported by your smart card. The Group Policy setting requiring FIPS-compliance prevents BitLocker from using any other key derivation function for encryption. You have to use a FIPS compliant smart card in FIPS restricted environments. |
FVE_E_ENH_PIN_INVALID 0x80310099 |
The BitLocker encryption key could not be obtained from the TPM and enhanced PIN. Try using a PIN containing only numerals. |
FVE_E_INVALID_PIN_CHARS 0x8031009A |
The requested TPM PIN contains invalid characters. |
FVE_E_INVALID_DATUM_TYPE 0x8031009B |
The management information stored on the drive contained an unknown type. If you are using an old version of Windows, try accessing the drive from the latest version. |
FVE_E_EFI_ONLY 0x8031009C |
The feature is only supported on EFI systems. |
FVE_E_MULTIPLE_NKP_CERTS 0x8031009D |
More than one Network Key Protector certificate has been found on the system. |
FVE_E_REMOVAL_OF_NKP_FAILED 0x8031009E |
Removal of the Network Key Protector certificate must be done using the Certificates snap-in. |
FVE_E_INVALID_NKP_CERT 0x8031009F |
An invalid certificate has been found in the Network Key Protector certificate store. |
FVE_E_NO_EXISTING_PIN 0x803100A0 |
This drive is not protected with a PIN. |
FVE_E_PROTECTOR_CHANGE_PIN_MISMATCH 0x803100A1 |
Please enter the correct current PIN. |
FVE_E_PROTECTOR_CHANGE_BY_STD_USER_DISALLOWED 0x803100A2 |
You must be logged on with an administrator account to change the PIN or password. Click the link to reset the PIN or password as an administrator. |
FVE_E_PROTECTOR_CHANGE_MAX_PIN_CHANGE_ATTEMPTS_REACHED 0x803100A3 |
BitLocker has disabled PIN and password changes after too many failed requests. Click the link to reset the PIN or password as an administrator. |
FVE_E_POLICY_PASSPHRASE_REQUIRES_ASCII 0x803100A4 |
Your system administrator requires that passwords contain only printable ASCII characters. This includes unaccented letters (A-Z, a-z), numbers (0-9), space, arithmetic signs, common punctuation, separators, and the following symbols: # $ & @ ^ _ ~ . |
FVE_E_FULL_ENCRYPTION_NOT_ALLOWED_ON_TP_STORAGE 0x803100A5 |
BitLocker Drive Encryption only supports used space only encryption on thin provisioned storage. |
FVE_E_WIPE_NOT_ALLOWED_ON_TP_STORAGE 0x803100A6 |
BitLocker Drive Encryption does not support wiping free space on thin provisioned storage. |
FVE_E_KEY_LENGTH_NOT_SUPPORTED_BY_EDRIVE 0x803100A7 |
The required authentication key length is not supported by the drive. |
FVE_E_NO_EXISTING_PASSPHRASE 0x803100A8 |
This drive is not protected with a password. |
FVE_E_PROTECTOR_CHANGE_PASSPHRASE_MISMATCH 0x803100A9 |
Please enter the correct current password. |
FVE_E_PASSPHRASE_TOO_LONG 0x803100AA |
The password cannot exceed 256 characters. |
FVE_E_NO_PASSPHRASE_WITH_TPM 0x803100AB |
A password key protector cannot be added because a TPM protector exists on the drive. |
FVE_E_NO_TPM_WITH_PASSPHRASE 0x803100AC |
A TPM key protector cannot be added because a password protector exists on the drive. |
FVE_E_NOT_ALLOWED_ON_CSV_STACK 0x803100AD |
This command can only be performed from the coordinator node for the specified CSV volume. |
FVE_E_NOT_ALLOWED_ON_CLUSTER 0x803100AE |
This command cannot be performed on a volume when it is part of a cluster. |
FVE_E_EDRIVE_NO_FAILOVER_TO_SW 0x803100AF |
BitLocker did not revert to using BitLocker software encryption due to group policy configuration. |
FVE_E_EDRIVE_BAND_IN_USE 0x803100B0 |
The drive cannot be managed by BitLocker because the drive's hardware encryption feature is already in use. |
FVE_E_EDRIVE_DISALLOWED_BY_GP 0x803100B1 |
Group Policy settings do not allow the use of hardware-based encryption. |
FVE_E_EDRIVE_INCOMPATIBLE_VOLUME 0x803100B2 |
The drive specified does not support hardware-based encryption. |
FVE_E_NOT_ALLOWED_TO_UPGRADE_WHILE_CONVERTING 0x803100B3 |
BitLocker cannot be upgraded during disk encryption or decryption. |
FVE_E_EDRIVE_DV_NOT_SUPPORTED 0x803100B4 |
Discovery Volumes are not supported for volumes using hardware encryption. |
FVE_E_NO_PREBOOT_KEYBOARD_DETECTED 0x803100B5 |
No pre-boot keyboard detected. The user may not be able to provide required input to unlock the volume. |
FVE_E_NO_PREBOOT_KEYBOARD_OR_WINRE_DETECTED 0x803100B6 |
No pre-boot keyboard or Windows Recovery Environment detected. The user may not be able to provide required input to unlock the volume. |
FVE_E_POLICY_REQUIRES_STARTUP_PIN_ON_TOUCH_DEVICE 0x803100B7 |
Group Policy settings require the creation of a startup PIN, but a pre-boot keyboard is not available on this device. The user may not be able to provide required input to unlock the volume. |
FVE_E_POLICY_REQUIRES_RECOVERY_PASSWORD_ON_TOUCH_DEVICE 0x803100B8 |
Group Policy settings require the creation of a recovery password, but neither a pre-boot keyboard nor Windows Recovery Environment is available on this device. The user may not be able to provide required input to unlock the volume. |
FVE_E_WIPE_CANCEL_NOT_APPLICABLE 0x803100B9 |
Wipe of free space is not currently taking place. |
FVE_E_SECUREBOOT_DISABLED 0x803100BA |
BitLocker cannot use Secure Boot for platform integrity because Secure Boot has been disabled. |
FVE_E_SECUREBOOT_CONFIGURATION_INVALID 0x803100BB |
BitLocker cannot use Secure Boot for platform integrity because the Secure Boot configuration does not meet the requirements for BitLocker. |
FVE_E_EDRIVE_DRY_RUN_FAILED 0x803100BC |
Your computer does not support BitLocker hardware-based encryption. Check with your computer manufacturer for firmware updates. |
FVE_E_SHADOW_COPY_PRESENT 0x803100BD |
BitLocker cannot be enabled on the volume because it contains a Volume Shadow Copy. Remove all Volume Shadow Copies before encrypting the volume. |
FVE_E_POLICY_INVALID_ENHANCED_BCD_SETTINGS 0x803100BE |
BitLocker Drive Encryption cannot be applied to this drive because the Group Policy setting for Enhanced Boot Configuration Data contains invalid data. Please have your system administrator resolve this invalid configuration before attempting to enable BitLocker. |
FVE_E_EDRIVE_INCOMPATIBLE_FIRMWARE 0x803100BF |
This PC's firmware is not capable of supporting hardware encryption. |
FVE_E_PROTECTOR_CHANGE_MAX_PASSPHRASE_CHANGE_ATTEMPTS_REACHED 0x803100C0 |
BitLocker has disabled password changes after too many failed requests. Click the link to reset the password as an administrator. |
FVE_E_PASSPHRASE_PROTECTOR_CHANGE_BY_STD_USER_DISALLOWED 0x803100C1 |
You must be logged on with an administrator account to change the password. Click the link to reset the password as an administrator. |
FVE_E_LIVEID_ACCOUNT_SUSPENDED 0x803100C2 |
BitLocker cannot save the recovery password because the specified Microsoft account is Suspended. |
FVE_E_LIVEID_ACCOUNT_BLOCKED 0x803100C3 |
BitLocker cannot save the recovery password because the specified Microsoft account is Blocked. |
FVE_E_NOT_PROVISIONED_ON_ALL_VOLUMES 0x803100C4 |
This PC is not provisioned to support device encryption. Please enable BitLocker on all volumes to comply with device encryption policy. |
FVE_E_DE_FIXED_DATA_NOT_SUPPORTED 0x803100C5 |
This PC cannot support device encryption because unencrypted fixed data volumes are present. |
FVE_E_DE_HARDWARE_NOT_COMPLIANT 0x803100C6 |
This PC does not meet the hardware requirements to support device encryption. |
FVE_E_DE_WINRE_NOT_CONFIGURED 0x803100C7 |
This PC cannot support device encryption because WinRE is not properly configured. |
FVE_E_DE_PROTECTION_SUSPENDED 0x803100C8 |
Protection is enabled on the volume but has been suspended. This is likely to have happened due to an update being applied to your system. Please try again after a reboot. |
FVE_E_DE_OS_VOLUME_NOT_PROTECTED 0x803100C9 |
This PC is not provisioned to support device encryption. |
FVE_E_DE_DEVICE_LOCKEDOUT 0x803100CA |
Device Lock has been triggered due to too many incorrect password attempts. |
FVE_E_DE_PROTECTION_NOT_YET_ENABLED 0x803100CB |
Protection has not been enabled on the volume. Enabling protection requires a connected account. If you already have a connected account and are seeing this error, please refer to the event log for more information. |
FVE_E_INVALID_PIN_CHARS_DETAILED 0x803100CC |
Your PIN can only contain numbers from 0 to 9. |
FVE_E_DEVICE_LOCKOUT_COUNTER_UNAVAILABLE 0x803100CD |
BitLocker cannot use hardware replay protection because no counter is available on your PC. |
FVE_E_DEVICELOCKOUT_COUNTER_MISMATCH 0x803100CE |
Device Lockout state validation failed due to counter mismatch. |
FVE_E_BUFFER_TOO_LARGE 0x803100CF |
The input buffer is too large. |