Inspiron 11 3000 Service Manual

Procedure

1. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
2. Replace the screw (M2x2) that secures the system board to the palm-rest and keyboard assembly.
3. Slide the touchpad cable and keyboard cable into their connectors and close the latches to secure the cables.
4. Connect the power-adapter port cable, speaker cable, and coin-cell battery cable to their connectors on the system board.
5. Slide the display cable into the connector on the system board and close the latch to secure the cable.
6. Slide the display-cable bracket into the slot on the palm-rest and keyboard assembly.
7. Align the screw hole on the display-cable bracket with the screw hole on the system board.
8. Replace the screw (M2x3) that secures the display-cable bracket to the system board.