System Board Video Riser: Module sensor
for System Board, device removed was asserted
|
Critical |
This event is generated when the required module
is removed.
|
Mezz B<slot number> Status: Add-in
Card sensor for Mezz B<slot number>, install error was asserted
|
Critical |
This event is generated when an incorrect Mezzanine
card is installed for I/O fabric.
|
Mezz C<slot number> Status: Add-in
Card sensor for Mezz C<slot number>, install error was asserted
|
Critical |
This event is generated when an incorrect Mezzanine
card is installed for I/O fabric.
|
Hdwar version err: Version Change sensor,
hardware incompatibility was asserted
|
Critical |
This event is generated when an incompatible hardware
is detected.
|
Hdwar version err: Version Change sensor,
hardware incompatibility (BMC firmware) was asserted
|
Critical |
This event is generated when a hardware is incompatible
with the firmware.
|
Hdwar version err: Version Change sensor,
hardware incompatibility (BMC firmware and CPU mismatch) was asserted
|
Critical |
This event is generated when the CPU and firmware
are not compatible.
|
Link Tuning: Version Change sensor, successful
software or F/W change was deasserted
|
Warning |
This event is generated when the link tuning setting
for proper NIC operation fails to update.
|
Link Tuning: Version Change sensor, successful
hardware change <device slot number> was deasserted
|
Warning |
This event is generated when the link tuning setting
for proper NIC operation fails to update.
|
LinkT/FlexAddr: Link Tuning sensor, failed
to program virtual MAC address (Bus # Device # Function #) was asserted
|
Critical |
This event is generated when Flex address can be
programmed for this device.
|
LinkT/FlexAddr: Link Tuning sensor, device
option ROM failed to support link tuning or flex address (Mezz <location>)
was asserted
|
Critical |
This event is generated when ROM does not support
Flex address or link tuning.
|
LinkT/FlexAddr: Link Tuning sensor, failed
to get link tuning or flex address data from BMC/iDRAC was asserted
|
Critical |
This event is generated when link tuning or Flex
address information is not obtained from BMC/iDRAC.
|
The <name> is removed.
|
Critical |
This event is generated when the device was removed. |
The <name> is inserted.
|
Information |
This event is generated when the device was inserted
or installed.
|
A fabric mismatch detected between IOM
and mezzanine card <number>.
|
Critical |
This event is generated when an incorrect Mezzanine
card is installed for I/O fabric.
|
Hardware incompatibility detected with
mezzanine card <number>.
|
Critical |
This event is generated when an incorrect Mezzanine
card is installed in the system.
|
The QuickPath Interconnect (QPI) width
degraded.
|
Warning |
This event is generated when the bus is not operating
at maximum speed or width.
|
The QuickPath Interconnect (QPI) width
regained.
|
Information |
This event is generated when the bus is operating
at maximum speed or width.
|
BIOS detected an error configuring the
Intel Trusted Execution Technology (TXT).
|
Critical |
This event is generated when TXT initialization
failed.
|
Processor detected an error while performing
an Intel Trusted Execution Technology (TXT) operation.
|
Critical |
This event is generated when TXT CPU microcode
boot failed.
|
BIOS Authenticated Code Module detected
an Intel Trusted Execution Technology (TXT) error during POST.
|
Critical |
This event is generated when TXT Post failed. |
SINIT Authenticated Code Module detected
an Intel Trusted Execution Technology (TXT) error at boot.
|
Critical |
This event is generated when the Authenticated
Code Module detected a TXT initialization failure.
|
Intel Trusted Execution Technology (TXT)
is operating correctly.
|
Information |
This event is generated when the TXT returned
from a previous failure.
|
Failure detected on Removable Flash Media
<name>.
|
Critical |
This event is generated when the SD card module
is installed but improperly configured or failed to initialize.
|
Removable Flash Media <name> is write
protected.
|
Warning |
This event is generated when the module is write-protected.
Changes may not be written to the media.
|
Internal Dual SD Module is redundant.
|
Information |
This event is generated when both SD cards are
functioning properly.
|
Internal Dual SD Module redundancy is
lost.
|
Critical |
This event is generated when either one of the
SD cards or both the SD cards are not functioning properly.
|