Dell Chassis Management Controller Version 6.0 for PowerEdge M1000e RACADM CLI Guide

PDF

feature


Description	Displays all active chassis features. The information displayed includes feature name, date activated and the serial number of the SD card used to activate the feature. Dell Feature Cards may contain more than a feature. After any feature included on a Dell Feature Card is activated on a chassis, any other features that may be included on that Dell Feature Card cannot be activated on a different chassis. NOTE To use this subcommand to deactivate FlexAddress, you must have the Chassis Configuration Administrator privilege. A user with login privileges can view status only. NOTE To deactivate FlexAddress features, the chassis must be turned off.
Synopsis	racadm feature -s racadm feature -d -c <featurename> racadm feature -r -c ExtendedStorage
Input	-s –Displays the status of active features. -d –Deactivates feature specified in -c option. NOTE When the FlexAddress and FlexAddressPlus feature are active, deactivating one of them results in deactivation of the other feature also. -r —Reformats damaged or unformatted extended storage media. CAUTION Using the -r switch deactivates the extended storage feature, if active; reformats the SD card in the active CMC card slot; and may Restart the active CMC. -c — <featurename> — must be one of the following: flexAddress flexAddressPlus ExtendedStorage (with -d, or -r) NOTE The —a option is not supported for CMC 5.0.
Example	Display the current status of all chassis features: racadm feature -s Deactivate the FlexAddressPlus feature on the chassis: racadm feature -d -c FlexAddressPlus