Dell Chassis Management Controller Version 6.0 for PowerEdge M1000e RACADM CLI Guide

getpbinfo


Description	Displays power budget status information. To run this subcommand, you must have the CMC Login User privilege.
Synopsis	racadm getpbinfo
Input	N/A

Example

Displays power budget status information

racadm getpbinfo

[Power Budget Status]


System Input Power	= 1574 W
Peak System Power	= 1916 W
Peak System Power Timestamp	= 09:29:20 11/26/2014
Minimum System Power	= 374 W
Minimum System Power Timestamp	= 09:20:51 11/26/2014
Overall Power Health	= OK
Redundancy	= No
System Input Power Cap	= 16685 W
Redundancy Policy	= None
Dynamic PSU Engagement Enabled	= No
System Input Max Power Capacity	= 16685 W
Input Redundancy Reserve	= 0 W
Input Power Allocated to Servers	= 1826 W
Input Power Allocated to Chassis Infrastructure	= 1212 W
Total Input Power Available for Allocation	= 13648 W
Standby Input Power Capacity	= 0 W
Server Based Power Management Mode	= No
Max Power Conservation Mode	= No
Server Performance Over Power Redundancy	= No
Power Available for Server Power-on	= 13648 W
Extended Power Performance (EPP) Status	= Disabled
Available Power in EPP Pool	= 0 W (0 BTU/h)
Used Power in EPP Pool	= 0 W (0 BTU/h)
EPP Percent - Available	= 0.0

[Chassis Power Supply Status Table]

[Server Module Power Allocation Table]

NOTE Extended Power Performance (EPP) – related fields are displayed even if EPP is disabled.