Dell Chassis Management Controller Version 6.0 for PowerEdge M1000e RACADM CLI Guide

PDF

netstat


Description	Displays the routing table and the current connections. To run this subcommand, you must have the Execute Diagnostic Commands permission.
Synopsis	racadm netstat
Input	N/A

Output

Kernel IPv6 routing table


Destination	Next Hop	Flags Metric	Ref	Use	Iface
::1/128	::	U	0	30	1 lo
fe80::200:ff:fe00:d01/128	::	U	0	0	1 lo
fe80::/64	::	U	256	0	0 ethl
ff00::/8	::	U	256	0	0 ethl

Kernel IP routing table


Destination	Gateway	Genmask	Flags	MSS	Window	irtt	Iface
192.168.0.31	0.0.0.0	255.255.255.0	U	0	0	0	bond0
0.0.0.0	192.168.0.32	0.0.0.0	UG	0	0	0	bond0

Active Internet connections (w/o servers)


Proto	Recv-Q	Send-Q	Local Address	Foreign Address	State
tcp	0	0	127.0.0.1:8195	127.0.0.1:52887	ESTABLISHED
tcp	0	0	127.0.0.1:52175	127.0.0.1:199	ESTABLISHED
tcp	0	0	127.0.0.1:199	127.0.0.1:52175	ESTABLISHED
tcp	0	0	192.168.0.32	192.168.0.31	ESTABLISHED
tcp	0	0	127.0.0.1:52174	127.0.0.1:199	ESTABLISHED
tcp	0	0	127.0.0.1:52887	127.0.0.1:8195	ESTABLISHED