Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Dell PowerEdge C6320p Owner's Manual

Removing the fabric cable from the processor

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  3. Remove the sled from the enclosure.
  4. Remove the air shroud.

Steps

  1. Pull the white tab on the fabric connector to release the connector from the processor base plate.
  2. Slide the connector away from the processor to disengage and release it from the processor.
    Figure 1. Unlocking the fabric cable connector
    This image shows unlocking the fabric connector from the processor
    Figure 2. Disengaging the fabric connector from the processor
    This image shows disengaging the fabric connector from the processor

Next steps

  1. Connect the fabric cable to the processor.
  2. Install the air shroud.
  3. Follow the procedure listed in the After working inside your system section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\