Status | | |
MaxVirtualFunctions | Int64 | The number of virtual functions (VFs) that are available for this Network Device Function. |
NetDevFuncCapabilities | Collection(NetworkDeviceFunction.v1_0_0.NetworkDeviceTechology) | Capabilities of this network device function. NOTE: The values of NetDevFuncCapabilities are determined by the port that the partition belongs to. The values of NetDevFuncCapabilities for all the partitions belonging to a particular port are the same. |
NetDevFuncType | NetworkDeviceFunction.v1_0_0.NetworkDeviceTechology | The configured capability of this network device function. |
|
FibreChannel |
WWPN | String | The effective current World-Wide Port Name (WWPN) of this network device function (physical function). If an assignable WWPN is not supported, WWPN is a read only alias of the PermanentWWPN. |
PermanentWWPN | String | PermanentWWPN is the permanent WWPN address assigned to this network device function (physical function). |
WWNN | String | The effective current World-Wide Node Name (WWNN) of this network device function (physical function). If an assignable WWNN is not supported, WWNN is a read only alias of the PermanentWWNN. |
WWNSource | NetworkDeviceFunction.v1_0_0.WWNSource | The configuration source of the World-Wide Names (WWNs) for this connection (WWPN and WWNN). |
FCoELocalVLANId | Int64 | For FCoE connections, The VLAN ID configured locally by setting this property. This value shall be used for FCoE traffic to this network device function during boot unless AllowFIPVLANDiscovery is true and a valid FCoE VLAN ID is found via the FIP VLAN Discovery Protocol. |
FCoEActiveVLANId | Int64 | The active FCoE VLAN ID. |
BootTargets |
WWPN | String | World-Wide Port Name (WWPN) to boot from. |
LUNID | String | The Logical Unit Number (LUN) ID to boot from on the device referred to by the corresponding WWPN. |
|
Ethernet |
MACAddress | String | The effective current MAC Address of this network device function. If an assignable MAC address is not supported, this is a read-only alias of the PermanentMACAddress. |
PermanentMACAddress | String | This is the permanent MAC address assigned to this network device function (physical function). |
MTUSize | Int64 | The Maximum Transmission Unit (MTU) configured for this Network Device Function. This value serves as a default for the OS driver when booting. The value only takes effect on boot. |
|
iSCSIBoot |
IPAddressType | NetworkDeviceFunction.v1_0_0.IPAddressType | The type of IP address (IPv6 or IPv4) being populated in the iSCSIBoot IP address fields. Mixing of IPv6 and IPv4 addresses on the same network device function shall not be permissible. |
InitiatorIPAddress | String | The IPv6 or IPv4 address of the iSCSI boot initiator. |
InitiatorName | String | The iSCSI boot initiator name. |
InitiatorDefaultGateway | String | The IPv6 or IPv4 iSCSI boot default gateway. |
InitiatorNetmask | String | The IPv6 or IPv4 netmask of the iSCSI boot initiator. |
TargetInfoViaDHCP | String | A boolean indicating whether the iSCSI boot target name, LUN, IP address, and netmask should be obtained from DHCP. |
PrimaryTargetName | String | The name of the primary iSCSI boot target (iSCSI Qualified Name, IQN). |
PrimaryTargetIPAddress | String | The IP address (IPv6 or IPv4) for the primary iSCSI boot target. |
PrimaryTargetTCPPort | Int64 | The TCP port for the primary iSCSI boot target. |
PrimaryLUN | Int64 | The logical unit number (LUN) for the primary iSCSI boot target. |
PrimaryVLANEnable | Boolean | It indicates if this VLAN is enabled for the primary iSCSI boot target. |
PrimaryVLANId | Int64 | The 802.1q VLAN ID to use for iSCSI boot from the primary target. This VLAN ID is only used if PrimaryVLANEnable is true. |
PrimaryDNS | String | The IPv6 or IPv4 address of the primary DNS server for the iSCSI boot initiator. |
SecondaryTargetName | String | The name of the Secondary iSCSI boot target (iSCSI Qualified Name, IQN). |
SecondaryTargetIPAddress | String | The IP address (IPv6 or IPv4) for the Secondary iSCSI boot target. |
SecondaryTargetTCPPort | Int64 | The TCP port for the Secondary iSCSI boot target. |
SecondaryLUN | Int64 | The logical unit number (LUN) for the Secondary iSCSI boot target. |
SecondaryVLANEnable | Boolean | It indicates if this VLAN is enabled for the Secondary iSCSI boot target. |
SecondaryVLANId | Int64 | The 802.1q VLAN ID to use for iSCSI boot from the Secondary target. This VLAN ID is only used if SecondaryVLANEnable is true. |
SecondaryDNS | String | The IPv6 or IPv4 address of the Secondary DNS server for the iSCSI boot initiator. |
IPMaskDNSViaDHCP | Boolean | A boolean indicating whether the iSCSI boot initiator uses DHCP to obtain the iniator name, IP address, and netmask. |
AuthenticationMethod | NetworkDeviceFunction.v1_0_0.AuthenticationMethod | The iSCSI boot authentication method for this network device function. |
CHAPUsername | String | The username for CHAP authentication. |
CHAPSecret | String | The shared secret for CHAP authentication. |