跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell OptiPlex 9010/7010 Ultra Small Form Factor Owner's Manual

PDF

Disabling a System Password

The system's software security features include a system password and a setup password. The password jumper disables any password(s) currently in use.
  • NOTE: You can also use the following steps to disable a forgotten password.
  1. Follow the procedures in Before Working on Your Computer.
  2. Remove the cover.
  3. Identify the PSWD jumper on the system board.
  4. Remove the PSWD jumper from the system board.
    • NOTE: The existing passwords are not disabled (erased) until the computer boots without the jumper.
  5. Install the cover.
    • NOTE: If you assign a new system and/or setup password with the PSWD jumper installed, the system disables the new password(s) the next time it boots.
  6. Connect the computer to the electrical outlet and power-on the computer.
  7. Power-off the computer and disconnect the power cable from the electrical outlet.
  8. Remove the cover.
  9. Replace the PSWD jumper on the system board.
  10. Install the cover.
  11. Follow the procedures in After Working on Your Computer.
  12. Power-on the computer.
  13. Go to the system setup, and assign a new system or setup password. See Setting up a System Password.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\