跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell OptiPlex 9010/7010 Ultra Small Form Factor Owner's Manual

PDF

Removing the System Board

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove:
    1. cover
    2. front bezel
    3. drive cage
    4. system fan
    5. power supply
    6. heat sink
    7. processor
    8. memory
    9. input/output panel
    10. WLAN card
    11. speaker
  3. Disconnect all the cables connected to the chassis.
    Figure displaying how to disconnect all the cables connected to the chassis.
  4. Disconnect all the cables connected to the system board.
    Figure displaying how to disconnect all the cables connected to the chassis.
  5. Remove the screws that secure the system board to the chassis.
    Figure displaying how to remove the screws that secure the system board to the chassis.
  6. Remove the 7–mm hex screw from the system board.
    Figure displaying how to remove the 7 mm hex screw from the system board.
  7. Slide the system board towards the front of the computer and remove.
    Figure displaying how to remove the system board from the chassis.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\