跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell OptiPlex 9010/7010 Ultra Small Form Factor Owner's Manual

PDF

Enhanced Pre-Boot System Assessment (ePSA) Diagnostics

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device groups allowing you to:
  • Run tests automatically or in an interactive mode
  • Repeat tests
  • Display or save test results
  • Run thorough tests to introduce additional test options to provide extra information about the failed device(s)
  • View status messages that inform you if tests are completed successfully
  • View error messages that inform you of problems encountered during testing
  • CAUTION: Use the system diagnostics to test only your computer. Using this program with other computers may cause invalid results or error messages.
  • NOTE: Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal when the diagnostic tests are performed.
  1. Power-on the computer.
  2. As the computer boots, press the <F12> key as the Dell logo appears.
  3. On the boot menu screen, select the Diagnostics option. The Enhanced Pre-boot System Assessment window is displayed, listing all devices detected in the computer. The diagnostics starts running the tests on all the detected devices.
  4. If you wish to run a diagnostic test on a specific device, press <Esc> and click Yes to stop the diagnostic test.
  5. Select the device from the left pane and click Run Tests.
  6. If there are any issues, error codes are displayed. Note the error code and contact Dell.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\