VNXe1600

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

To ensure optimal performance and stability for your Dell system, be aware of the latest updates available for the drivers and firmware. There are several systems to do this as explained in the article below.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

ESXi Host Report run through the Dell Technologies Central website "https://psapps.emc.com/central/my-work" is missing HBA information.

Dell Storage Simple Support Matrices on E-Lab Navigator provide the optimal interoperability for your storage solution.

A Storage Processor fails to start after re-imaging to VNX Block version 05.33.009.5.236 because of a code deficiency in the Operating Environment for that release.

ViPR Dell EMC Storage Resource Management Suite (SRM) shows a blank file‑quota report; quotas are configured, yet the XML API fails with a Java heap space error due to insufficient heap memory on the ControlStation.

Software reports a “Media is write protected” error on a Digital Linear Tape (DLT) 1 with DLT4000 tape; the DLT1 can only read, not write; causing a write failure seen as protection.

This article explains how to work around the PCI components mismatch error during failover.

The Pre-Upgrade Health Check (PUHC) script fails. The tar reports 'This does not look like a tar archive' and header errors, caused by the browser incorrectly decompressing the tar.gz file.

Information about customer replaceable unit (CRU) videos for Dell Technologies VxFlex Ready node products

Information about customer replaceable unit (CRU) videos for Dell Technologies Powerflex products

This article explains how to assign an Initial Company Administrator.

Error message: "Not enough server storage is available to process this command" Can't change permissions on CIFS shares

This article describes how to gather the necessary log for Dell Support to troubleshoot MetroSync Manager issues.

How to gather SPCollects from any VNX1 or VNX2 Series array, running OE Release 32 and above, using either Unisphere Client, USM or Navisphere Secure CLI.

Agentless import of multiple VNX volumes to PowerStore fail and may result in DataPath Panics.

VNXe Upgrade: Steps and Plan

Replication, Cofiguring Replication, Asynchronous Replication

Enable or disable Secure Shell on the system

SNMP overview: SNMP model and traps The Simple Network Management Protocol (SNMP) is an application layer protocol for transferring system status and management information between network devices. SNMP enables network administrators to assess network performance, monitor the status of network devices, and remotely manage these devices. Configuring VNXe SNMP trap destinations with Unisphere Add an SNMP destination

Steps to expand/shrink the FAST Cache.

Creating iscsi default routes are failing from GUI and CLI with same error.

Hosts unable to access iscsi LUN's from one SP

This article provides information about FS /dev/hda3 mounted on / filling up (at 100%, max = 90%)

Initiator health status shows warning - "The initiator does not have any logged in initiator path. Check the connection between the initiator and the storage system.

After upgrading VNXe to 3.1.13.10192168, users running Linux such as Red Hat, SUSE linux, so forth, are facing performance issues with FC and ISCSI protocols.

Upload of Candidate file fails during upgrade process on HTML GUI on specific VNXe1600 arrays. During this process, an exception was observed in Apache

Customer has VASA enabled/configured, but unable to expand LUN from VSphere. We were able to expand the LUN from within Unisphere.

How to register host HBA initiators manually in a VNX array?