Enterprise SONiC Distribution

Refer to the information about the DSA-2019-065 and CVE-2019-3726, also known as the Dell Update Package (DUP) Framework Uncontrolled Search Path Vulnerability.

How to use general switchport mode on Dell PowerConnect switch, Dell PowerConnect how to user general mode

When using Ethernet Virtual Private Network (EVPN) MultiHoming (MH) with PortChannel interfaces running SONiC, customers may experience a delay or failure in MAC address synchronization across Virtual Tunnel End Points (VTEPs) during firewall failover scenarios. This issue was observed primarily with Fortinet FortiGate firewalls but can occur with other devices using similar failover mechanisms. The problem results in partial or complete traffic disruption until MAC tables converge, which can take up to 30 minutes without manual intervention. Resolution: Upgrade to SONiC 4.5.1, which disables kernel MAC learning and introduces fixes for duplicate address detection and router-ID consistency. Network stability confirmed after upgrading switches to SONiC 4.5.1 and FortiGate-200F v7.4.9, build2829,250924 (GA.M)

This document highlights minimum, recommended, and latest code versions for Dell Technologies Networking products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This article explains how to configure Multi-chassis Link Aggregation Group (MC-LAG) in Dell Networking SONiC.

This article explains about Secure Shell (SSH) based login in Dell Networking SONiC. This article uses a switch running Dell SONiC 4.1.

Dell Enterprise SONiC remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell Enterprise SONiC remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell Enterprise SONiC remediation is available for an SSH cryptographic key vulnerability that may be exploited by malicious users to compromise the affected system.

Dell Enterprise SONiC OS remediation is available for an Information Disclosure Vulnerability that may be exploited by malicious users to compromise the affected system.

Dell Enterprise SONiC remediation is available for an uncontrolled resource consumption vulnerability that may be exploited by malicious users to compromise the affected system.

A brief overview of basic troubleshooting steps for fan issues across all Dell switch platforms with removable fan units.

Dell Enterprise SONiC remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

This article explains how to configure a basic Access Control List (ACL) to block traffic to a specific subnet in Dell Networking SONiC with an example.

Best practices for troubleshooting Power Supply Units (PSUs) errors or failure on Dell Ethernet switches

A brief overview of basic troubleshooting steps across all Dell switch platforms for a switch that appears to be unresponsive.

How to configure Port Security in Dell Networking SONiC. This article is tested in Dell Networking SONiC 4.2 Edge Standard.

This article explains about configuring static routes in the Dell SONiC Management Framework CLI.

This article explains about how to use Power over Ethernet (PoE) in Dell Networking SONiC Switches. This article uses a Dell SONiC Edge 4.1 PoE platform.

This article documents the procedure to perform a clean install for ONIE, Firmware updater, SSD firmware, and OS10 from USB This would be helpful when you are upgrading the switches from a Factory-installed firmware or an old firmware. You must uninstall OS10 and do a clean installation of the switch is running on 10.4.2.x or earlier release, as per the Dell SmartFabric OS10 Installation, Upgrade, and Downgrade Guide.

This article explains how to generate and collect a Tech-support file for Dell Networking SONiC version 3.0, 3.1, 3.2, 3.3, 3.4, 3.5 releases.

This article explores memory monitoring options in Enterprise SONiC distribution by Dell (e-SONiC), using Linux Shell, Management Framework CLI, and SNMP.

Customers experienced interface flapping issues with their Intel X710 NIC and PKR0R transceiver on SONiC 4.4.0 switches.

Dynamic Port-Channel member ports that do not receive the LACPDUs from a peer LAG device are marked LACP inactive and do not carry any network traffic. However in certain scenarios, individual inactive LACP ports are still required to carry network traffic {both transmit and receive}. To allow inactive LACP ports to automatically transition into LACP ports that can carry network traffic, enable lacp individual on the Port-Channel.

This article explains how to configure Breakout Ports in Dell Networking SONiC. This article uses a switch running Dell SONiC 4.1.

This article explains how to configure a Dell SONiC switch as a Network Time Protocol (NTP) Client. This article uses a switch running Dell SONiC 4.1.

This article helps getting started and answers some basic questions about Dell Networking SmartFabric OS10.

Dell Enterprise SONiC remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

APEX AIOps Infrastructure Observability is a cloud-based application that leverages machine Learning to proactively monitor and measure the overall health of the Dell Technologies infrastructure through intelligent, comprehensive, and predictive analytics. This article steps through the requirements to enable APEX AIOps Infrastructure Observability on Dell Networking PowerSwitch systems.