記事
無効なエントリーです。英字、数字、特殊文字(<>)(%/;,=#-/*を除く)のみを使用してください
73件中30件を表示
73件中73件を表示
スイッチ モデルDS6620B-V2から、スイッチ パネルではなく内部でオレンジ色でゆっくり点滅しているライトは、BrocadeによってeUSBカード(マザーボード上)のLEDであることが確認されます。
更新済み: 5月 19, 2026
ID: 000217788
Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates
更新済み: 7月 24, 2026
ID: 000185734
オペレーティング システムはデバイスのすべてのパスを正しく検出していますが、PowerPathにパスが1つありません。
更新済み: 5月 28, 2026
ID: 000058949
This article explains Dell guidelines on company administrator assignment.
更新済み: 5月 24, 2026
ID: 000379388
This article explains how to assign an Initial Company Administrator.
更新済み: 5月 23, 2026
ID: 000374134
This article explains how to promote Company Administrators.
更新済み: 5月 23, 2026
ID: 000374126
This article displays a list of Dell Software Products and related articles on how to obtain the Software Unique ID (SWUID) for each specific product. The SWUID is required for streamlining the processes related to both the Software License Renewal process and opening a Support Case.
更新済み: 5月 22, 2026
ID: 000296065
There can be different reasons for PowerPath not to pick-up a path and the most common reason is a "reserve_policy" mismatch between the hdisk and the pseudo device ... but insuch a case, the pseudo device remains "defined" since PowerPath doesn't know which reserve_policy needs to be applied to the pseudodevice. Here, both the hdiskpower and the leftover hdisk are available, resulting into a duplicate PVID issue (same PVID on the pseudo-device as the one on the leftover hdisk).
更新済み: 5月 18, 2026
ID: 000215028
PowerPathがインストールされ(FXアレイを介してライセンスが付与される)、VMAX上にデバイスが構成されているホストがUnisphereに表示されない(PowerPathホストの下のPMAX UnisSphere GUIに表示されない)。powermt update host_registration」またはホストの再起動は役に立ちません。
更新済み: 5月 18, 2026
ID: 000214558
Is the Windows PowerPath Viewer application supported for use with the new PowerPath Linux vAPP?
更新済み: 5月 15, 2026
ID: 000204793
This article explains the solution when the PowerPath command powermt display stops responding in an AIX VIOS environment.
更新済み: 5月 13, 2026
ID: 000195987
PowerPath for AIX is causing an unexpected host reboot everyday around midnight after an installation of (or an upgrade to) PowerPath 7.0 or PowerPath 7.0 P01.
更新済み: 5月 05, 2026
ID: 000172441
PowerPath IBM AIX ODM reserve lock attributes not converting to reserve_policy.
更新済み: 5月 05, 2026
ID: 000171373
PowerPath 6.0 (or earlier) is installed and configuring VMAX devices fine. However, after upgrading to PowerPath 6.1, configuring devices is failing with no error message. The devices are not configured for PowerPath and no pseudodevice is created.
更新済み: 5月 05, 2026
ID: 000170122
PowerPath AIX ホストで powermt コマンドを実行できない
更新済み: 5月 05, 2026
ID: 000169350
PowerPath for AIX 6.4: powerdd: MpxPeriodicCallbackDaemon race condition crash
更新済み: 5月 05, 2026
ID: 000168802
この記事では、Dellサポート ページを使用してサービス リクエスト(SR)を開く手順について説明します。
お使いのDell製デバイスに関するサポートをすぐに受けられます。保留を待つ必要はもうありません。技術的な悩みの種はもうありません。
Dellでは、問題解決、修理のスケジュール設定、サポートの利用を、お使いのデバイスまたはDellのサポートWebサイトから直接簡単に行えるようにしています。
更新済み: 4月 19, 2026
ID: 000132371
2 つの仮想 HBA を持つ NPIV 構成では、1 つの仮想 HBA がダウンし、I/O 用のパスが 1 つ残っているにもかかわらず、LVM_IO_FAIL が errpr に記録され、ERROR CODE AS DEFINED IN sys/errno.h が 22 (EINVAL) に設定されます。これらのLVMエラーにより、ボリュームを使用しているアプリケーションがクラッシュします。この問題は、NPIV以外の環境でも発生する可能性があります。
更新済み: 4月 18, 2026
ID: 000081958
時々書き込みが失敗し、デバイスが「書き込み保護」されているかのように、明らかな理由もなくLVMエラー(LVM_IO_FAIL - EWRPROTECT)が発生します。エラーは次のように報告されました。「AIXは、PowerPathを使用するアレイでディスク操作エラーを表示します。アレイにエラーは表示されません......」
更新済み: 4月 18, 2026
ID: 000072366
IBM AIX for EMC SymmetrixにODM定義をインストールする方法
更新済み: 4月 18, 2026
ID: 000068498
Powerpathのアップグレード後も、デバイスをバッキングするVMAX3デバイスを持つVTDは定義されたままです。
更新済み: 4月 18, 2026
ID: 000063898
PowerPath for Windowsバージョン6.1がWindows Server 2016にインストールされている場合、PowerPathのリリースはOSよりも前のため、検証アラートは、多くのドライバーのOSよりも前の日付であることを示します。
更新済み: 4月 18, 2026
ID: 000062991
Windows 2016のインストール後は、接続されているすべてのSANディスクが表示されますが、PowerPath 6.1をインストールするとすぐに、SANディスクがディスク管理に表示されなくなり、PowerPathはディスクを表示できなくなります。これは、PowerPathの初回インストール後にのみ発生します。
更新済み: 4月 18, 2026
ID: 000061944
PowerPath Migration Enabler 6.2でPPME(エラー22)と報告される ターゲットに障害が発生しました。4ノード クラスターでPPME移行を試行する場合は、移行を中止する必要があります
更新済み: 4月 18, 2026
ID: 000059511
PowerPath 6を実行しているAIX Power 7で、Unity 400Fから起動するという問題が発生しました。SAN上のブート イメージを正常にアップグレードすることはできませんが、内部ディスクにアップグレードすることはできます。SANディスクのアップグレード前にPowerPathがアンインストールされました。
更新済み: 4月 17, 2026
ID: 000056907
パスの障害と予約の競合エラーが指摘されています
更新済み: 4月 17, 2026
ID: 000056886
この記事では、移行が保留中であると表示された場合にクラスター ノードでPowerPath 5.7 SP1をアンインストールする方法について説明します。
更新済み: 4月 17, 2026
ID: 000056027
PowerPath for を実行しているRed Hat Enterprise Linux (RHEL) 7.xシステムでカーネル パニックが発生することがある
Linuxバージョン6.3をSymantecソフトウェア(VRTSvxvm、任意のバージョン)と組み合わせると、次のような結果になる場合があります
データ欠損。
更新済み: 4月 17, 2026
ID: 000054851
Server hung while PPME migration was in progress at which TargetLUfault errors are received in powermig info.
更新済み: 4月 17, 2026
ID: 000054845
PowerPath 6.4 for AIXでは、emc_reserve_v3.shスクリプトが「PowerPath version not >= 5.5」で失敗します。
更新済み: 4月 17, 2026
ID: 000050278