Dell EMC Unity XT 680F

このドキュメントでは、デル・テクノロジーズのエンタープライズおよびデータセンター インフラストラクチャ製品向けの最小コード バージョン、推奨コード バージョン、および最新コード バージョンについて説明します。デル・テクノロジーズでは、コード導入データを慎重に評価および監視し、製品リリースが当社の厳しい要求を満たし、お客様に信頼性の高い製品とソリューションを提供できるようにしています。

ストレージ プロファイルを変更すると、Storage Centerシステムのログに［Invalid previous cost（以前のコストが無効です）］メッセージが過剰に記録されます。また、重複除外または圧縮を行っているボリュームでは、データが目的の場所に移動されません。

This article explains how to address or order a failed drive in a Dell Unity system for SymptomCode: Neo14:60258 (User Correctable)

The Unity Upgrade Wizard fails and reports the following error: "The system encountered an unexpected error while upgrading the software. Reboot your Primary storage processor and try upgrading again. Check System > Logs for related messages. (Error Code: 0x6000cb9)"

If inconsistent block size settings are used in the 2-way NDMP data transfer path, the NDMP backup will not work and the tapes used during the backup may be marked full prematurely. It has been observed that the NDMP backup will start but the tape loaded in the drive gets marked full immediately, even if there is space remaining on the tape.

この記事では、Unity が CVE-2026-20833 の影響を受ける可能性があるかどうかについて説明します。

このKBでは、Unityのホスト名またはフレンドリー名がsyslogサーバーで更新されない状況に対処する方法について説明します。

This article explains Dell guidelines on company administrator assignment.

This article explains how to assign an Initial Company Administrator.

This article explains how to promote Company Administrators.

Unity Unisphere is unable to connect using Secure Connect Gateway (SCG) (User Correctable).

This article helps users safely manage storage by outlining key considerations before deleting snapshots in Dell Unity systems. (User Correctable)

Joining Active Directory (AD) fails with error: Miscellaneous failure ASN.1 failed call to system time library. (User Correctable)

Repetitive alert seen in Unisphere when Periodic Online Drive Firmware Update (pODFU) is enabled. (User Correctable)

The Serial Number for the new DPE may change to a temporary serial number after replacing the Unity Disk Processor Enclosure (DPE).

This KB should help to resolve the error. Error Code:0x6500136

This article displays a list of Dell Software Products and related articles on how to obtain the Software Unique ID (SWUID) for each specific product. The SWUID is required for streamlining the processes related to both the Software License Renewal process and opening a Support Case.

There is a change in SNMP Trap notification behavior after the Unity OE 5.2 upgrade. Before the upgrade, the system sent an SNMP alert for all configured events as often as they occurred. After the upgrade to OE 5.2 or later, only five SNMP alerts for the same event are sent within a 24-hour window.

Unable to configure LDAP and LDAPS -- connection verification fails.

Adding NTP server fails with "Cannot create NTP servers. At least one of the specified NTP servers is not working (Error Code:0x6000840).

Dell Technologies VxFlex Ready Node製品の顧客交換可能ユニット(CRU)に関するビデオに関する情報

This article contains information about customer replaceable unit (CRU) videos for Dell Technologies VNX and VNXe products.

Dell Technologies PowerProtectおよびData Domain製品の顧客交換可能ユニット(CRU)に関するビデオに関する情報です

Dell Technologies PowerFlex製品の顧客交換可能ユニット(CRU)に関するビデオに関する情報

Dell Technologies ECS製品の顧客交換可能ユニット(CRU)に関するビデオに関する情報

Information about customer replaceable unit (CRU) videos for Dell Technologies Unity products

Information about customer replaceable unit (CRU) videos for Dell Technologies Connectrix products

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

本ドキュメントでは、修理・廃棄時における記憶装置の取扱いについて説明します。

The I/O module is powered off. Try rebooting the Storage Processor (SP). If the I/O module remains powered off after a reboot, you may have to replace the I/O module. (Dell Correctable)