Removal
Side Cover
- Identify the side cover highlighted in blue.
- Loosen the captive screws that secure the side cover to the chassis.
- Slide and lift the side cover off the chassis.
Front bezel
- Identify the front bezel highlighted in blue.
- Gently pry and release the front bezel tabs sequentially from the top.
- Rotate the front bezel outward from the chassis and remove the front bezel.
Hard Drive Carrier
Disk drive cage
- Identify the disk drive cage highlighted in blue.
- Remove the screw to release the disk drive cage from the chassis..
- Lift the disk drive and detach it from the mounting points on the chassis.
- Rotate the drive cage and place it on the chassis.
- Lift the disk drive cage away from the computer.
Solid State Drive (SSD) 2230
Install
Solid State Drive (SSD) 2230
Disk drive cage
- Identify the disk drive cage location highlighted in blue.
- Place the disk drive cage upside down on the chassis.
- Connect the data and power cable to the connectors on the optical drive.
- Hold the disk drive cage upright and match its mounting points with the slots on the chassis.
- Align the screw hole on the cage with the screw hole on the chassis.
- Install the screw to secure the disk drive cage in place.
- Route the power and data cables through the routing guide on the disk drive cage.
Hard Drive Carrier
Front bezel
- Identify the front bezel location highlighted in blue.
- Align the front cover tabs with the slots on the chassis.
- Rotate the front cover towards the chassis and snap it into place.
Side Cover
- Identify the side cover location highlighted in blue.
- Slide the side cover towards the front of the computer.