Removal
System Cover
Identify the system cover highlighted in blue.
Using a 1/4 inch flat head or a phillips #2 screwdriver, rotate the lock counterclockwise to the unlock position.
Lift the release latch until the system cover slides back.
Lift the system cover from the system.
Cooling Fan
Select the cooling fan you want to replace.
Holding the orange touch points, lift the cooling fan module from the fan board.
Drive Backplane Cover
Identify the drive backplane cover highlighted in blue.
Slide the backplane cover in the direction indicated by the arrows on the drive backplane cover.
Lift the backplane cover from the system.
Drive Backplane
Identify the drive backplane highlighted in blue.
Disconnect the drive backplane cable from the system board.
Press the blue release tabs to disengage the drive backplane from the hooks on the system.
Lift the drive backplane from the system.
Install
Drive Backplane
Identify the drive backplane location highlighted in blue.
Insert the drive backplane into the guides, and lower it until the blue release tabs click into place.
Connect the drive backplane cable to the system board.
Drive Backplane Cover
Identify the drive backplane cover location highlighted in blue.
Align the drive backplane cover with the guide slots on the system.
Slide the drive backplane cover to the front of the system until the drive backplane cover fits into place.
Cooling Fan
Confirm the cooling fan, you want to replace.
Align and install the cooling fan module onto the connector on the fan board.
Press the orange touch point on the cooling fan module until it is firmly connected.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system, then slide the cover into place.
Close the system cover release latch.
Using a 1/4 inch flat head or phillips #2 screwdriver, rotate the lock clockwise to the lock position.