Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Fan Duct
Identify the fan duct highlighted in blue.
Press the retention tabs on both sides of the fan duct to release it.
Pull and remove the fan duct from the system.
Intrusion Switch
Identify the intrusion switch highlighted in blue.
Disconnect the intrusion switch cable from the system board.
Slide and remove the Intrusion switch from the chassis.
Install
Intrusion Switch
Identify the intrusion switch location highlighted in blue.
Insert the intrusion switch into its slot and slide the switch to secure it into the slot.
Connect the intrusion switch cable to the connector on the system board.
Fan Duct
Identify the fan duct location highlighted in blue.
Position the fan duct to align it with the slots on the computer chassis.
Press the fan duct until it clicks into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover of the system.