Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the thumbscrews that secure the side cover to the system.
Slide and lift the side cover away from the system.
Fan Duct
Identify the fan duct highlighted in blue.
Press the retention tabs on both sides of the fan duct to release it.
Pull and remove the fan duct from the system.
Serial Module
Identify the serial module highlighted in blue.
Remove the screws that secure the serial module to the system.
Disconnect the serial module cable from the connector on the system board.
Remove the serial module off the system board.
Install
Serial Module
Identify the serial module location highlighted in blue.
Insert the serial module into the slot on the chassis.
Connect the serial module cable to the connector on the system board.
Install the screws that secure the serial module to the chassis.
Fan Duct
Identify the fan duct location highlighted in blue.
Position the fan duct to align it with the slots on the computer chassis.
Press the fan duct until it clicks into place.
Side Cover
Identify the side cover location highlighted in blue.
Align the tabs on the side cover with the slots and place the side cover on the system.
Tighten the thumbscrews that secure the side cover of the system.