Removal
Front Bezel
Identify the front bezel highlighted in blue
Unlock the front bezel by using the key.
Press the release button, and pull the left end of the front bezel.
Unhook the right end, and remove the front bezel.
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Air shroud
Identify the air shroud highlighted in blue
Holding the touch points, lift the cooling shroud away from the system.
Backplane cover
Identify the backplane cover highlighted in blue
Slide the backplane cover in the direction of the arrows marked on the backplane cover.
Lift the backplane cover away from the system.
Hard Drive Backplane
Identify the hard drive backplane highlighted in blue
Press the release button to open the release handle.
Holding the handle, slide the drive carrier out of the drive slot.
Disconnect all data, signal and power cable(s) from the backplane.
Press the blue release tabs and lift the backplane to disengage the backplane from the hooks on the system.
Install
Hard Drive Backplane
Identify the hard drive backplane location highlighted in blue
Connect the all data, signal and power cable(s) to the backplane.
Use the hooks on the system as guides to align the slots on the backplane with the guides on the system.
Lower the drive backplane until the blue release tabs snap into place.
Insert the drive carrier into the slot and slide until it connects with the backplane.
Close the drive carrier release handle to lock the drive in place.
Backplane cover
Identify the backplane cover location highlighted in blue
Align the tabs on the backplane cover with the guide slots on the system.
Slide the backplane cover toward the front of the system until the cover locks into place.
Air shroud
Identify the cooling shroud location highlighted in blue
Align the slot on the air shroud with the standoff on the chassis.
Lower the air shroud into the system until it is firmly seated.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.
Front Bezel
Identify the front bezel location highlighted in blue
Hook the right end of the front bezel onto the system.
Fit the free end of the front bezel onto the system.
Lock the front bezel by using the key.