Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

Creating Operating System Installation Directories For Systems Running Windows Server 2012 Operating System

NOTE: The following procedures are provided as best practice guidelines for creating operating system distribution folders compatible with DTK sample scripts. For complete instructions on setting up an installation directory structure for an unattended installation, see your operating system documentation.

To deploy on Windows Server 2012 operating systems:

Create an operating system-specific directory in the root directory of the network share. For example, W2K12_deploy.
Create two directories under the W2K12_deploy directory: sources and < platform name >, for example, PER720. Copy the contents of the operating system media to sources.
- NOTE: The platform name must be a DTK standard name. To know the platform name, run TKENVSET.BAT located in the x:\Dell\Toolkit\Template\Scripts directory, and then run the SET command. In the Details section, see the DT_PLATFORM name.
Under PER720, create two directories: $OEM$ and Out-of-Box Drivers.
Copy all the drivers to W2K812_deploy\PER720\Out-of-Box Drivers . You can copy each driver to a different subfolder.
Copy UnattendedW2K12.xml from \Toolkit\Template\Configs to W2K12_deploy\PER720.
- NOTE: If necessary, modify the unattend.xml for DiskID under the tags DiskConfiguration and ImageInstall. Default value is 0 for DiskID. Make sure that the DiskID specified in the UnattendW2K12.xml is available to install the operating system. You can run the DiskPart utility to check disk details. You can also edit the MetaData tag to select the required operating system in UnattendW2K12.xml.
Boot your system with DTK Windows PE image.

Run the following command to connect the target system to the shared folder W2K12_deploy.

X:\Dell\Toolkit\Tools net use z: \\<
                                    IP address of the management station>\W2K12_deploy