Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

In CONFIGURATION ROUTER OSPF mode, assign the router ID.

• Assign the router ID for the OSPFv2 process. CONFIG-ROUTER-OSPF-id mode router-id ip address
• Disable OSPF. CONFIGURATION mode no router ospf process-id
• Reset the OSPFv2 process. EXEC Privilege mode clear ip ospf process-id
• View the current OSPFv2 status. EXEC mode show ip ospf process-id

Dell#show ip ospf 55555
                                 Routing Process ospf 55555 with ID 10.10.10.10
                                 Supports only single TOS (TOS0) routes
                                 SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
                                 Number of area in this router is 0, normal 0 stub 0 nssa 0
                                 Dell#