Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat
Nous contacter

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Setting Recurring Daylight Saving Time

Set a date (and time zone) on which to convert the switch to daylight saving time on a specific day every year.

If you have already set daylight saving for a one-time setting, you can set that date and time as the recurring setting with the clock summer-time time-zone recurring command.

To set a recurring daylight saving time, use the following command.

Set the clock to the appropriate timezone and adjust to daylight saving time every year. CONFIGURATION mode clock summer-time time-zone recurring start-week start-day start-month start-time end-week end-day end-month end-time [ offset]
  • time-zone : Enter the three-letter name for the time zone. This name displays in the show clock output.
  • start-week : (OPTIONAL) Enter one of the following as the week that daylight saving begins and then enter values for start-day through end-time :
    • week-number : Enter a number from 1 to 4 as the number of the week in the month to start daylight saving time.
    • first: Enter the keyword first to start daylight savings time in the first week of the month.
    • last: Enter the keyword last to start daylight saving time in the last week of the month.
  • start-month : Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year.
  • start-day : Enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year.
  • start-year : Enter a four-digit number as the year. The range is from 1993 to 2035.
  • start-time : Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm.
  • end-week : If you entered a start-week, enter the one of the following as the week that daylight saving ends:
    • week-number : Enter a number from 1 to 4 as the number of the week in the month to end daylight saving time.
    • first: Enter the keyword first to end daylight saving time in the first week of the month.
    • last: Enter the keyword last to end daylight saving time in the last week of the month.
  • end-month : Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year.
  • end-day : Enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year.
  • end-year : Enter a four-digit number as the year. The range is from 1993 to 2035.
  • end-time : Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm.
  • offset : (OPTIONAL) Enter the number of minutes to add during the summer-time period. The range is from 1 to1440. The default is 60 minutes.

Example of the clock summer-time recurring Command 

Dell(conf)#clock summer-time pacific recurring Mar 14 2012 00:00 Nov 7 2012 00:00
                                 Dell(conf)#
  • NOTE: If you enter <CR> after entering the recurring command parameter, and you have already set a one-time daylight saving time/date, the system uses that time and date as the recurring setting.

Example of Clock Summer-Time Recurring Parameters 

Dell(conf)#clock summer-time pacific recurring ?
                                 <1-4>     Week number to start
                                 first     Week number to start
                                 last      Week number to start
                                 <cr>
                                 Dell(conf)#clock summer-time pacific recurring
                                 Dell(conf)#

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\