Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Establishing Sessions for Static Routes

Sessions are established for all neighbors that are the next hop of a static route.

Figure 1. Establishing Sessions for Static Routes Illustration of establishing session for static routes.

To establish a BFD session, use the following command.

Establish BFD sessions for all neighbors that are the next hop of a static route. CONFIGURATION mode ip route bfd

Example of the show bfd neighbors Command to Verify Static Routes

To verify that sessions have been created for static routes, use the show bfd neighbors command.

The bold line shows BFD for static routes is enabled.

R1(conf)#ip route 2.2.3.0/24 2.2.2.2
                                 R1(conf)#ip route bfd
                                 R1(conf)#do show bfd neighbors
                                 
                                 * - Active session role
                                 Ad Dn - Admin Down
                                 C - CLI
                                 I - ISIS
                                 O - OSPF
                                 R - Static Route (RTM)
                                 LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult Clients
                                 
                                 2.2.2.1   2.2.2.2    Gi 4/24   Up    200    200    4    R

To view detailed session information, use the show bfd neighbors detail command, as shown in the examples in Disabling BFD for BGP.


Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\