Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

A primary VLAN is a port-based VLAN that is specifically enabled as a primary VLAN to contain the promiscuous ports and PVLAN trunk ports for the private VLAN.

1. Access INTERFACE VLAN mode for the VLAN to which you want to assign the PVLAN interfaces. CONFIGURATION mode interface vlan vlan-id
2. Enable the VLAN. INTERFACE VLAN mode no shutdown
3. Set the PVLAN mode of the selected VLAN to primary. INTERFACE VLAN mode private-vlan mode primary
4. Map secondary VLANs to the selected primary VLAN. INTERFACE VLAN mode private-vlan mapping secondary-vlan vlan-list The list of secondary VLANs can be:
   • Specified in comma-delimited ( VLAN-ID,VLAN-ID ) or hyphenated-range format ( VLAN-ID-VLAN-ID ).
   • Specified with this command even before they have been created.
   • Amended by specifying the new secondary VLAN to be added to the list.
5. Add promiscuous ports as tagged or untagged interfaces. INTERFACE VLAN mode tagged interface or untagged interface Add PVLAN trunk ports to the VLAN only as tagged interfaces. You can enter interfaces singly or in range format, either comma-delimited ( slot/port,port,port ) or hyphenated ( slot/port-port ). You can only add promiscuous ports or PVLAN trunk ports to the PVLAN (no host or regular ports).
6. (OPTIONAL) Assign an IP address to the VLAN. INTERFACE VLAN mode ip address ip address
7. (OPTIONAL) Enable/disable Layer 3 communication between secondary VLANs. INTERFACE VLAN mode ip local-proxy-arp