Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

To create a zone alias and add devices to the alias, follow these steps.

1. Create a zone alias name. CONFIGURATION mode fc alias ZoneAliasName
2. Add devices to an alias. ALIAS CONFIGURATION mode member word The member can be WWPN (00:00:00:00:00:00:00:00), port ID (000000), or alias name (word).

Dell(conf)#fc alias al1
                                 Dell(conf-fc-alias-al1)#member 030303
                                 Dell(conf-fc-alias-al1)#exit
                                 Dell(conf)#fc zone z1
                                 Dell(conf-fc-zone-z1)#member al1
                                 Dell(conf-fc-zone-z1)#exit