Dell PowerEdge M630 Systems (VRTX Enclosure) Owner's Manual

PDF

iDRAC Direct LED indicator codes

NOTE: The iDRAC Direct LED indicator does not turn on for the USB mode.

This figure shows the iDRAC Direct status indicator. — Figure 1. iDRAC Direct LED indicator

Table 1. iDRAC Direct LED indicatorsThis table describes the iDRAC Direct status indicators.
Convention	iDRAC Direct LED indicator pattern	Condition
A	Green	Turns green for a minimum of two seconds at the starting and end of a file transfer.
B	Flashing green	Indicates file transfer or any operation tasks.
C	Green and turns off	Indicates that the file transfer is complete.
D	Not lit	Indicates that the USB is ready to be removed or that a task is complete.

The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect).

Table 2. iDRAC Direct LED indicator patternsThis table describes the iDRAC Direct status indicator patterns
iDRAC Direct LED indicator pattern	Condition
Solid green for two seconds	Indicates that the laptop is connected.
Flashing green (on for two seconds and off for two seconds)	Indicates that the laptop connected is recognized.
Turns off	Indicates that the laptop is unplugged.