- Notes, cautions, and warnings
- Dell PowerEdge M630p overview
- Documentation resources
- Technical specifications
- Initial system setup and configuration
- Pre-operating system management applications
- Options to manage the pre-operating system applications
- System Setup
- Viewing System Setup
- System Setup details
- System BIOS
- Viewing System BIOS
- System BIOS Settings details
- Boot Settings
- Network Settings
- System Security
- System Information
- Memory Settings
- Processor Settings
- SATA Settings
- Integrated Devices
- Serial Communication
- System Profile Settings
- Miscellaneous Settings
- iDRAC Settings utility
- Device Settings
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing server module components
- Safety instructions
- Recommended tools
- Installing and removing a server module
- System cover
- Inside the server module
- System memory
- Cooling shroud
- Processor blank and DIMM blank
- PCIe mezzanine cards
- Internal dual SD module (optional)
- rSPI card (optional)
- SD vFlash card
- Network Daughter Card
- Processors
- Hard drives or SSDs
- Hard drive or SSD bay numbering
- Hard drive or SSD installation guidelines
- Removing a hard drive or SSD
- Installing a hard drive or SSD
- Removing a hard drive or SSD blank
- Installing a hard drive or SSD blank
- Shutdown procedure for servicing a hard drive
- Configuring the boot drive
- Removing a 2.5-inch hard drive or SSD from a 2.5-inch hard drive or SSD carrier
- Installing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier
- Removing a 1.8-inch SSD from a 1.8-inch SSD carrier
- Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
- Removing the hard drive or SSD cage
- Installing the hard drive or SSD cage
- Hard drive or SSD backplane
- Storage controller card
- System board
- System battery
- Using system diagnostics
- Jumpers and connectors
- Troubleshooting your system
- Getting help
Dell PowerEdge M630 Systems (VRTX Enclosure) Owner's Manual
SATA Settings details
About this task
- Option
- Description
- Embedded SATA
- Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID modes. This option is set to AHCI by default.
- Security Freeze Lock
- Sends Security Freeze Lock command to the Embedded SATA drives during POST. This option is applicable only for ATA and AHCI modes.
- Write Cache
- Enables or disables the command for Embedded SATA drives during POST.
- Port A
- Sets the drive type of the selected device. For Embedded
SATA settings in ATA mode, set
this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port B
- Sets the drive type of the selected device. For Embedded
SATA settings in ATA mode, set
this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port C
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port D
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port E
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port F
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port G
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port H
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port I
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
- Port J
- Sets the drive type of the selected device. For Embedded SATA settings in ATA mode,
set this field to Auto to enable BIOS support.
Set it to OFF to turn off BIOS support.
For AHCI or RAID mode, BIOS support is always enabled.
- Option
- Description
- Model
- Specifies the drive model of the selected device.
- Drive Type
- Specifies the type of drive attached to the SATA port.
- Capacity
- Specifies the total capacity of the hard drive. This field is undefined for removable media devices such as optical drives.
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Geef een beoordeling (1-5 sterren).
Selecteer of het artikel nuttig is of niet.
Opmerkingen mogen geen speciale tekens bevatten: <>() \