Ga naar hoofdinhoud
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.

Dell PowerEdge M630 Systems (VRTX Enclosure) Owner's Manual

Replacing the internal USB key

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: To avoid interference with other components in the server module, the maximum permissible dimensions of the USB key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
  1. Follow the safety guidelines listed in safety instructions section.

  2. Follow the procedure listed in the Before working inside your system section.

Steps

  1. Locate the USB connector/USB key.
  2. If installed, remove the USB key.
  3. Insert the new USB memory key into the USB connector.
    Figure 1. Replacing the USB memory key
    This figure shows replacing the USB memory key.
    1. USB memory key
    2. USB memory key connector
    Figure 2. Installing the USB memory key
    This image shows installing the USB memory key
    1. USB memory key
    2. USB memory key connector

Next steps

  1. Follow the procedure listed in the After working inside your system section.

  2. Enter the System Setup and ensure that the USB key is detected by the system.


Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \