Ga naar hoofdinhoud
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.

Dell PowerEdge M630 Systems (VRTX Enclosure) Owner's Manual

Removing the PCIe mezzanine card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Follow the safety guidelines listed in safety instructions section.

  2. Follow the procedure listed in the Before working inside your system section.

Steps

  1. Open the retention latch by pressing the ridged area on the retention latch, and lifting the latch up.
    CAUTION: To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
  2. Lift the PCIe mezzanine card up and away from the system.
  3. Close the retention latch.
    Figure 1. Removing the PCIe mezzanine card
    This figure shows removing the PCIe mezzanine card
    1. PCIe mezzanine card (2)
    2. connector (2)
    3. ridge area on the retention latch

Next steps

  1. Install the PCIe mezzanine card.

  2. Follow the procedure listed in the After working inside your system section.


Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \