Dell PowerEdge M630 Systems (VRTX Enclosure) Owner's Manual

System board connectors

Table 1. System board connectorsItem 1 is the battery connector. Item 2 is the storage connector. Item 3 is the Memory module sockets Connector. Item 4 is the Processor socket 2 connector:.. Item 5 is the Processor socket 1 connector. Item 6 is the Memory module sockets (processor 1) connector. Item 7 is the IDSDM/rSPI card connector. Item 8 is the PCIe mezzanine card connector for the expansion bus connector. Item 9 is the PCIe mezzanine card connector for the expansion bus connector. Item 10 is the SD vFlash card connector. Item 11 is the Network daughter card connector. Item 12 is the Memory module sockets (processor 1) connector. Item 13 is the System configuration jumpers connectors. Item 14 is the Memory module sockets (processor 2) connector. Item 15 is the USB connector. Item 16 is the USB connector. Item 17 is the TPM connector. Item 18 is the Hard-drive backplane connector.
Item	Connector	Description
1	BATTERY	Connector for the 3.0 V coin cell battery
2	STORAGE	Storage controller card connector
3	B3, B7, B11, B4, B8, B12	Memory module sockets (processor 2)
4	CPU2	Processor socket 2
5	CPU1	Processor socket 1
6	A1, A5, A9, A2, A6, A10	Memory module sockets (processor 1)
7	IDSDM/rSPI	IDSDM/rSPI card connector
8	MEZZ1_FAB_C	PCIe mezzanine card connector for the expansion bus
9	MEZZ2_FAB_B	PCIe mezzanine card connector for the expansion bus
10	VFLASH	SD vFlash card connector
11	bNDC	Network daughter card connector
12	A3, A7, A11, A4, A8, A12	Memory module sockets (processor 1)
13	PWRD_EN, NVRAM_CLR	System configuration jumpers NOTE: Access needs removal of system board.
14	B1, B5, B9, B2, B6, B10	Memory module sockets (processor 2)
15	USB2	USB port
16	USB1	USB port
17	TPM	TPM connector
18	J_BP	Hard drive backplane connector