Search Results (1.4K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi everyone, I have the server dell r740 and already install dell EMC open manage. so, i have plan to remove or uninstall this feature. what's the impact if i do to un-install dell EMC open manage ?
Question
•
Dell OpenManage Essentials
Community Accepted Solution
i have a T420 server box with sandy bridge motherboard. Yet every where I look, the specs say this board will support the E5-2400 v2 IVY bridge cpus, even gemini and chatgpt say this. Can i have a definitive answer about this because I have two of these boxes and four e5-2470 v2 CPUs. Will this ser
Question
•
Systems Management General
Community Accepted Solution
Hello, I have created catalog, then created baseline with one R430 server, then I did check compliance, and report shows me that many drivers needs to be updated but I cannot check any item on this report when I point mouse on check box it shows me "Device does not support Firmware Update" When I
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi Team, We have been noticing error on Dell OME console and plugins. it states as below. " This plugin does not meet the minimum requirements for installation" Appliance resources are not sufficient to either install or continue to run the Update Manager plugin efficiently:The OME VM is not confi
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
LIC017 MessageThe license file is corrupted, has not been unzipped, or is not a valid license file.Detailed DescriptionThis error can occur when the license file: 1) Signature is not valid. 2) Data is not in the correct format. 3) Missing needed data. 4) Contains unknown data. 5) Has not been unzipp
Question
•
Systems Management General
Community Accepted Solution
Customer using HCI based on VMware VSAN Ready nodes running on Dell PowerEdge servers. So, I'm wondering does CloudIQ support to collect those data? any concerns or limitation? Thank you. Panat
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, I want to migrate to OME v4 from a 3.10.2 version I managed to complete the first steps of the process on the v3 appliance but on the v4 appliance (destination) step 3 is stucked : Step 3: Check For Migration Readiness (import) Impossible to go further... Is there a solution to unblock t
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi i'm running firmware upgrade on more hosts inside Openmanage 4 and others on openmanage 3. I'm able to perform the upgrade, but after the host is updated it remain in power off. At the beginning the server is power on, operating system is ESXi 7.0.3. I've the same issue both on version 4 and 3 of
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi all, I am writing a script to automate BIOS changes and I am stuck on the part where I have to decide whether to Apply and Reboot or At Next Reboot. I am using Python and iDrac Redfish API. I want to go with At Next Reboot however I am stuck on it. I used: boot_set
Question
•
Systems Management General
Community Accepted Solution
On a fresh OME 4 deployment from the 4.0.0.202 OVF in vSphere 7, I cannot perform the initial admin password change, no matter what I use. If I don't include a special or capital character or not long enough, then it can tell and warns me so typing in appears to be accurate. Have tried powering fu
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello all, I downloaded the latest Hyper-V OME 4.0 vhd file and after creating the VM, assigning 16GB RAM and 4 processors, I just get a blinking cursor on a black screen when trying to boot it up, no errors. I have tried installing it on several servers (Server 2019 and Server 2022 hosts) and get
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Since installing the Dell ISM on Rocky 9.2 all of the hosts are showing ipv6 network errors. These machines are not running ipv6 or IPTABLES (Firewalld is being used). This appears to have crashed 2 of our 17 machines last night. This docuemnt show some info on iDrac communication (page 11) https:
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello We have installed the OMEVV plugin in our vCenter and it works fine as long an vcenter admin is using it. A nonadmin vcenter user cant start it. He receives the error 10008 "vCenter user does not have required privileges to access this feature."Which privileges are needed? The user has all DEL
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi, I'm able to add the majority of our fleet of VRTX with M630/M640 modules from Discovery with local admin sign in. About 20 percent of our fleet fails to add via discovery. I ran the built in troubleshoot tool and it's successful in connecting with every protocol option. Is there somewhere I ca
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, I'm using OpenManage Enterprise 4.0.0 (Build 202) with Update Manager 1.5.0.429. I successfully created a new repository in Plugins/Update Management, and it also created an associate baseline. But when editing any baseline in Configuration/Firmware Driver Compliance, I can only select catal
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I am using OME 4.0 to update some PowerEdge C6420. Currently they have iDRAC with Lifecycle Controller 4.x, and I'm updating against a baseline based on an automatically updated catalog (daily). Some have been updated the past days to 7.x, now the baseline reports 6.x as latest and suggests to downg
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Dear all, I just discovered the existence of OpenManage Enterprise 4.0.Reading the migration process from 3.10 I found out that in the OME 3.10 interface I should find a "Backup/Restore" menu item, but I can't find it in my OME 3.10 installation: Why I don't have the backup/restore menu item? Shou
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi there, We have big amount of DELL servers with dedicated iDRAC port and we manage them separately. For operations such as firmware upgrade, RAID creation, changing BIOS settings on a server, we go to iDRAC of every single server and doing it on every single host. I'm curious, if it's possible to
Question
•
Systems Management General
Community Accepted Solution
I had the OME to cloudIQ working on my OME appliance, but due to some issues I decided to build a new OME appliance and now none of my servers are showing up in cloudIQ. Is there a way to reinitialize this connection? From the documentation there is supposed to be a way to remove the plugin, but Im
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, i am new to DELL servers and reacently bought a used poweredge R520, my current BIOS version is 1.5.2 and iDRAC is 1.37.35 (Build 02) is it safe to upgrade to newest version or should i go step by step ?
Question
•
Systems Management General