Solutions Enabler: Los comandos de Symrdf fallan con el error "RDF Operation is not executed"
Summary: Los comandos de SRDF fallan con el error "RDF Operation is not executed".
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Cuando se intenta suspender un par de RDF existente, se produce un error:
RDF Operation will not be executed
Por ejemplo:
symrdf suspend -sid <Array SN> -file <Devicefile> -rdfg <RDF (RA) Group Number>
Execute an RDF 'Suspend' operation for device file
'Devicefile' (y/[n]) ? yes
RDF Operation will not be executed.
Cause
Si ingresa la palabra Yes en lugar de Y o N, se genera este error.
Resolution
Este es el funcionamiento según el diseño.
Cuando se ejecute el comando de SRDF y solicite ingresar y/[n], solo escriba la letra y si desea realizar la acción. No escriba la palabra "sí" completa. Si desea cancelar la acción, escriba solo la letra n.
Esto se aplica a todos los comandos de Solutions Enabler.
Affected Products
Solutions EnablerArticle Properties
Article Number: 000204150
Article Type: Solution
Last Modified: 18 Jul 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.