Dell NativeEdge: NativeEdge Service Console 클라이언트의 인터페이스 출력을 해석하는 방법
Summary: 이 문서에서는 인터페이스를 나열할 때 서비스 콘솔 툴의 출력을 해석하는 방법에 대해 간략하게 설명합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
NativeEdge 서비스 콘솔 클라이언트 툴을 시작하고 NativeEdge-enabled Device의 MAC 주소를 입력한 후 다음 메시지가 표시됩니다.
계속하려면 NativeEdge 엔드포인트와 동일한 Layer 2 네트워크에 있는 관련 인터페이스를 선택합니다.
Multiple interfaces are up. Select the valid interface from the device: (after this follows a list of NICs and their MAC addresses)
계속하려면 NativeEdge 엔드포인트와 동일한 Layer 2 네트워크에 있는 관련 인터페이스를 선택합니다.
Additional Information
NativeEdge 서비스 콘솔은 클라이언트와 NativeEdge 엔드포인트 간에 Layer 2 기반 연결을 사용합니다. 서비스 콘솔 툴이 시작되는 클라이언트 머신에 여러 네트워크가 구성되어 있는 경우 NativeEdge 엔드포인트에 연결하는 데 사용할 클라이언트 머신의 네트워크 인터페이스를 선택할 수 있는 옵션이 사용자에게 제공됩니다. 즉, L2 네트워크에 있는 클라이언트 머신의 인터페이스를 NativeEdge 엔드포인트로 선택합니다.
Affected Products
NativeEdge Solutions, NativeEdgeArticle Properties
Article Number: 000216330
Article Type: How To
Last Modified: 11 Mar 2024
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.