Dell VCF on VxRail: NSX-Tの「Edge VM Present in NSX Inventory Not Present in vCenter」でアラートを受信する
Summary: NSX-Tの「Edge VM Present in NSX Inventory Not Present in vCenter」でアラートを受信します。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Edge VMの問題に関する重大なアラートがNSX-Tで報告されます。
Edge仮想マシンの Moref-id がvCenter Serverで正しい。
問題はバージョンNSX-T 3.2.1.2およびVCF 4.5で見つかりましたが、これはバージョン固有の問題であるとは結論付いていません。
エラーの説明:
NSX-Tからのアラート:

図1: NSX-Tからのアラートのスクリーンショット
Edge仮想マシンの Moref-id がvCenter Serverで正しい。
問題はバージョンNSX-T 3.2.1.2およびVCF 4.5で見つかりましたが、これはバージョン固有の問題であるとは結論付いていません。
エラーの説明:
The VM "Edge VM" with moref id "vm-xxxxx" corresponding to the Edge Transport node fede "Edge Transport node id" vSphere placement parameters is found in NSX inventory but is not present in vCenter. Please check if the VM has been removed in vCenter or is present with a different VM moref id.
NSX-Tからのアラート:

図1: NSX-Tからのアラートのスクリーンショット
Cause
NSX-TとvCenter Server間の構成同期の問題
Resolution
この問題を解決するには、次の手順に従います。
図2:POST API情報が追加された例のスクリーンショット
APIレスポンスは、正常に完了すると200です。アラートはただちに「解決」状態に変わります。他のアクションは必要ありません。
- APIコマンドを使用して接続を更新します。
- NSX-Tの最新のバックアップが使用可能であることを確認します。
- APIは、「Postman」APIプラットフォームから実行できます。
- 以下のPOST APIを使用し、許可のために管理者ユーザー アカウントを追加し、コンテンツ タイプを「xml」のままにします。
POST https:///api/v1/transport-nodes/?action=refresh_node_configuration&resource_type=EdgeNode&read_only=true is the edge transport node id is the FQDN of NSX-T VIP
例:
図2:POST API情報が追加された例のスクリーンショット
APIレスポンスは、正常に完了すると200です。アラートはただちに「解決」状態に変わります。他のアクションは必要ありません。
Affected Products
VMWare Cloud on Dell EMC VxRail E560FArticle Properties
Article Number: 000216031
Article Type: Solution
Last Modified: 10 Sept 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.