VxRail 上的 Dell VCF:在 NSX-T 中接收警示「Edge VM 存在 NSX 清查不在 vCenter 中」
Summary: 在 NSX-T 中接收警示「Edge VM 存在 NSX 清查不在 vCenter 中」。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
在 NSX-T 中會針對 Edge VM 問題報告嚴重警示。
在 vCenter 伺服器中,Edge 虛擬機器的 Moref-ID 是正確的。
在 NSX-T 3.2.1.2 和 VCF 4.5 版中發現問題,但尚未斷定這是特定版本的問題。
錯誤說明:
NSX-T 的警示:

圖 1:來自 NSX-T 的警示螢幕擷取畫面
在 vCenter 伺服器中,Edge 虛擬機器的 Moref-ID 是正確的。
在 NSX-T 3.2.1.2 和 VCF 4.5 版中發現問題,但尚未斷定這是特定版本的問題。
錯誤說明:
The VM "Edge VM" with moref id "vm-xxxxx" corresponding to the Edge Transport node fede "Edge Transport node id" vSphere placement parameters is found in NSX inventory but is not present in vCenter. Please check if the VM has been removed in vCenter or is present with a different VM moref id.
NSX-T 的警示:

圖 1:來自 NSX-T 的警示螢幕擷取畫面
Cause
NSX-T 和 vCenter Server 之間的組態同步問題
Resolution
要解決此問題:
圖 2:新增 POST API 資訊的範例螢幕擷取畫面
成功完成後,API 回應即為 200。警示會立即變成「解決」狀態。不需要執行其他動作。
- 使用 API 命令重新整理連線。
- 確認有 NSX-T 最新備份可用。
- API 可從「Postman」API 平臺執行。
- 使用以下 POST API,新增系統管理員使用者帳戶以進行授權,並將內容類型保留為「xml」。
POST https:///api/v1/transport-nodes/?action=refresh_node_configuration&resource_type=EdgeNode&read_only=true is the edge transport node id is the FQDN of NSX-T VIP
例如:
圖 2:新增 POST API 資訊的範例螢幕擷取畫面
成功完成後,API 回應即為 200。警示會立即變成「解決」狀態。不需要執行其他動作。
Affected Products
VMWare Cloud on Dell EMC VxRail E560FArticle Properties
Article Number: 000216031
Article Type: Solution
Last Modified: 10 Sept 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.