OpenManage Enterprise 4.5 Support Matrix
Summary: This is the latest version of the Dell OpenManage Enterprise 4.5 Support Matrix.
Instructions
Expand the links to view information about servers, chassis, networking devices, VxRail, agents, hypervisors, OSs, and plug-ins supported by OpenManage Enterprise 4.5.
This section provides recommended hardware requirements for OpenManage Enterprise appliances running with and without plugins in small and large deployments. For more information about plug-in hardware requirements, see the User's Guide of the respective OpenManage Enterprise plug-ins available on the support site.
Maximum recommended hardware configuration
OpenManage Enterprise appliance is shipped with the maximum recommended hardware requirements to provide you a hassle-free deployment and installation of the appliance and plug-ins respectively. However, if your environment doesn't require the maximum hardware configuration, see "Manage memory and CPU requirements based on deployment size" section in this Support Matrix to determine the appropriate hardware resources required for your specific requirements. The following table lists recommended hardware requirements for installing OpenManage Enterprise and all of its plug-ins:
| Hardware configuration | Recommended configuration |
|---|---|
| RAM | 64 GB |
| Processor cores | 8 |
| Storage space | 830 GB* |
- *OpenManage Enterprise appliance is configured with two VDs, each with an initial storage space of 415 GB. The primary VD is leveraged for the core application and database while the secondary VD is required for additional features and supporting plug-ins. However, even without the secondary VDs selected during deployment, the appliance can still boot up for TUI configuration using only the primary VHDX.
- *Ensure that your hypervisor storage has enough free space to support the recommended virtual disk size of the appliance, and enough overhead to support snapshots and future expansion of the virtual disk.
- *Ensure that the primary disk and the secondary disk are identical in size always.
Manage memory and CPU requirements based on deployment size
If your environment doesn't require the generic maximum hardware configuration, use the following table to determine the appropriate hardware resources required for your specific requirements such as large-scale or small-scale deployments:
| OpenManage Enterprise appliance and plug-ins | Minimum RAM* | Minimum Cores | |
|---|---|---|---|
| OpenManage Enterprise | 40 GB | 8 | |
| Additional requirements for each plug-in | |||
| APEX AIOps Infrastructure Observability (formerly known as CloudIQ) (Default plug-in) | +4 GB | 8 | |
| Services (Default plug-in) | +8 GB | 8 | |
| Update Manager | +1 GB | 8 | |
| OpenManage Enterprise Integration for VMware vCenter (OMEVV) | +5 GB | 8 | |
| Operations Manager (Integration for Microsoft SCOM) | +3 GB | 8 | |
| VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) | +1 GB | 8 | |
| Total recommended hardware configuration with all plug-ins installed | 64 GB | 8 CPU cores | |
| OpenManage Enterprise appliance and plug-ins | Minimum RAM* | Minimum Cores | |
|---|---|---|---|
| OpenManage Enterprise | 19 GB | 4 | |
| Additional requirements for each plug-in | |||
| AIOps Infrastructure Observability (Default plug-in) | +2 GB | 4 | |
| Services (Default plug-in) | +8 GB | 4 | |
| Update Manager | +1 GB | 4 | |
| OpenManage Enterprise Integration for VMware vCenter (OMEVV) | +5 GB | 4 | |
| Operations Manager (Integration for Microsoft SCOM) | +3 GB | 4 | |
| VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) | +1 GB | 4 | |
| Total recommended hardware configuration with all plug-ins installed | 40 GB | 4 CPU Cores | |
Lists the supported plug-ins that can be enabled for additional OpenManage Enterprise monitoring and management capabilities.
| Plug-in | Supported Versions | Description |
|---|---|---|
| OpenManage Enterprise Services (Default plug-in) | 4.5 | Enables proactive and predictive monitoring and management support for devices with ProSupport and ProSupport Plus entitlements. |
| Update Manager | 1.9 | Enables administrators to create and manage repositories for PowerEdge devices with iDRAC or Windows that are managed in OpenManage Enterprise. |
| AIOps Infrastructure Observability (Default plug-in) | 2.5 | Enables administrators to register with the Dell AIOps Infrastructure Observability, select the device groups for data transfer to AIOps Infrastructure Observability for proactive monitoring and measurement of overall health of the selected devices. |
| OpenManage Enterprise Integration for VMware vCenter (OMEVV) | 1.8 | Enables streamlining the management processes in your data center environment by allowing you to use VMware vCenter Server to manage your full server infrastructure - both physical and virtual. |
| VMM and Configuration Manager (Integration for Microsoft SCVMM and MCM) | 1.7 | Enables you to add the Microsoft System Center Configuration Manager (MCM) and System Center Virtual Machine Manager (SCVMM) consoles to OpenManage Enterprise. After synchronizing devices, you can install Microsoft Windows OS on PowerEdge servers using an OpenManage Enterprise Advanced+ license. Using the Cluster-Aware Updating feature, you can update the firmware and drivers on the SCVMM-managed cluster nodes. |
| Operations Manager | 1.6 | Enables the monitoring of the Dell hardware assets that are discovered in OpenManage Enterprise using the System Center Operations Manager (SCOM) console. |
Supported devices, VxRail, agents, hypervisors, and OSs
The following table lists the platforms supported in OpenManage Enterprise for features such as discovery and inventory, monitoring and alerts, firmware management, configuration and deployment, and power management.
- Yes - Supported
- No - Not supported
| Platforms | Discovery and inventory | Monitoring and device alerts | Managing device firmware | Managing device configurations and deployment | Power Management |
|---|---|---|---|---|---|
| PowerEdge 17G servers | Yes | Yes | Yes | Yes | Yes |
| PowerEdge 16G servers | Yes | Yes | Yes | Yes | Yes |
| PowerEdge 15G servers | Yes | Yes | Yes | Yes | Yes |
| PowerEdge 14G servers | Yes | Yes | Yes | Yes | Yes
NOTE: The following devices do not support power management: PowerEdge R240 and T640.
|
| PowerEdge C series servers | Yes | Yes | Yes | Yes | Yes
NOTE: The folowing device does not support power management: PowerEdge C4140.
|
| PowerEdge AX node series servers | Yes | Yes | No
NOTE: While OpenManage Enterprise does not support the actual update of firmware, AX nodes are still included when generating update compliance reports.
|
Yes | No |
| PowerEdge XC series devices | Yes | Yes | No | No | Yes
NOTE: The following devices do not support power management: PowerEdge XC4510c, XC4520c, XC6400, XC640ENT XC Core,XC740xdENT XC Core,XC940ENT XC Core, XC6420ENT XC Core, XC6400 ENCLOSURE XC Core, XCXR2 Core, XC740xd2 Core, XC760-24N, and XC7625-24N.
|
| PowerEdge XE series devices | Yes | Yes | Yes
NOTE: The firmware update support for XE series platforms excludes GPU components.
|
Yes
NOTE: The following device does not support managing device configurations and deployment: PowerEdge XE7745.
|
Yes
NOTE: The following devices do not support power management: PowerEdge XE7740, PowerEdge XE9680L, and PowerEdge XE9685L.
|
| PowerEdge XR series devices | Yes | Yes | Yes
NOTE: The following device does not support device configuration and deployment: PowerEdge XR2.
|
Yes | Yes
NOTE: The following devices do not support power management: PowerEdge XR2 and PowerEdge XR5610c.
|
| Chassis | Yes | Yes | Yes | No
NOTE: The following device supports the device configuration and deployment: PowerEdge MX7000.
|
Yes
NOTE:
|
| VxRail appliances | Yes | Yes | No | No | Yes
NOTE: The following devices do not support power management: VxRail E665N, VxRail P470N, VxRail 6470F, VxRail D560F, and VxRail VS-760.
|
| PowerEdge HS series servers | Yes | Yes | Yes | Yes | No |
| vSAN Ready Nodes | Yes | Yes | No
NOTE: Use OpenManage Enterprise Integration for VMware vCenter plug-in for firmware update.
|
No
NOTE: Use OpenManage Enterprise Integration for VMware vCenter plug-in for managing device configuration and deployment.
|
No |
| Dell Storage modules | Yes | Yes | No | No | No |
| Dell Storage (Compellent) | Yes | Yes | No | No | No |
| PowerVault MD Series devices | Yes | Yes | No | No | No |
| PowerVault ME4 Series devices | Yes | Yes | No | No | No |
| PowerVault ME5 Series devices | Yes | Yes | No | No | No |
| PowerVault NX Series devices | Yes | Yes | No | No | No |
| PowerFlex devices | Yes | Yes | No | No | Yes |
| Coolant Distribution Units (CDU) | Yes | Yes | No | No | Yes |
| Power Shelves | Yes | Yes | No | No | Yes |
| Power Distribution Unit (PDU) | Yes | No | No | No | Yes |
| Uninterruptible Power Supply (UPS) | Yes | No | No | No | Yes |
| Non Dell servers | Yes | No | No | No | Yes |
| Networking Devices | Yes | Yes | No
NOTE: The following device supports managing device firmware: MX5108N.
|
No
NOTE: The following device supports managing device configuration and deployment: MX5108N.
|
No |
- PowerEdge R770
- PowerEdge R670
- PowerEdge R470
- PowerEdge R6715
- PowerEdge R6725
- PowerEdge R7715
- PowerEdge R7725
- PowerEdge R7725xd*
- PowerEdge R570
- PowerEdge M7725
- PowerEdge R770AP*
- An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
- Firmware and Driver update on R760 with Azure Stack HCI 23H2 OS are not supported from OpenManage Enterprise.
- PowerEdge R7625
- PowerEdge R760
- PowerEdge R760 With Azure Stack HCI 23H2 OS*
- PowerEdge R760XS
- PowerEdge R660
- PowerEdge R660XS
- PowerEdge MX760c
- PowerEdge R6625
- PowerEdge R6615
- PowerEdge R7615
- PowerEdge R860
- PowerEdge R960
- PowerEdge R760xa
- PowerEdge R760xd2
- PowerEdge T560
- PowerEdge T360
- PowerEdge R360
- PowerEdge R260
- PowerEdge T160
- PowerEdge R6515
- PowerEdge R6525
- PowerEdge R7515
- PowerEdge R7525
- PowerEdge R650
- PowerEdge R750
- PowerEdge R750xa
- PowerEdge MX750c
- PowerEdge R450
- PowerEdge R550
- PowerEdge R650xs
- PowerEdge R750xs
- PowerEdge T350
- PowerEdge T150
- PowerEdge T550
- PowerEdge R250
- PowerEdge R350
- PowerEdge M640
- PowerEdge R240
- PowerEdge R340
- PowerEdge R440
- PowerEdge R540
- PowerEdge R640
- PowerEdge R6415
- PowerEdge R740
- PowerEdge R740xd
- PowerEdge R740xd2
- PowerEdge R7415
- PowerEdge R7425
- PowerEdge R840
- PowerEdge R940
- PowerEdge R940XA
- PowerEdge T140
- PowerEdge T340
- PowerEdge T440
- PowerEdge T640
- PowerEdge FC640
- PowerEdge MX740c
- PowerEdge MX840c
- PowerEdge C4140
- PowerEdge C6420
- PowerEdge C6525
- PowerEdge C6520
- PowerEdge C6620
- PowerEdge C6615
- AX-640
- AX-650
- AX-6515
- AX-740xd
- AX-750
- AX-7525
- AX-760
- AX-660
- AX-4510c
- AX-4520c
Dell OEM devices (rebranded or de-branded PowerEdge servers), when discovered, are classified under System Groups > All Devices > Servers > OEM Servers on the All Devices page. If both the server and DRAC of the OEM device are discovered, they are correlated and displayed as one device under the OEM Devices group. Most of the functionality available to the PowerEdge servers—such as tasks, reports, and filters—are also available to the PowerEdge OEM servers. However, system update may not be possible if it is not supported by the OEM device module.
- The SATADOM-specific information is not displayed in the device inventory of OpenManage Enterprise.
- An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
- XC450
- XC4510c
- XC4520c
- XC640
- XC650
- XC740xd
- XC750
- XC750xa
- XC6420
- XC940
- XC640ENT XC Core
- XC740xdENT XC Core
- XC940ENT XC Core
- XC6420ENT XC Core
- XC6515
- XC6520
- XC7525
- XCXR2 Core
- XC740xd2 Core
- XC660-10
- XC660-12N
- XC660xs-4
- XC660xs-4s
- XC760-14
- XC760-24
- XC760-24N
- XC760xa
- XC7625-14
- XC7625-24N
- An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
- Node-initiated discovery is not supported for XE9685L.
- PowerEdge XE2420
- PowerEdge XE7420
- PowerEdge XE7440
- PowerEdge XE8545
- PowerEdge XE9680
- PowerEdge XE8640
- PowerEdge XE9640
- PowerEdge XE7745
- PowerEdge XE7740
- PowerEdge XE9680L
- PowerEdge XE9685L
- PowerEdge XR2
- PowerEdge XR11
- PowerEdge XR12
- PowerEdge XR4510c
- PowerEdge XR4520c
- PowerEdge XR7620
- PowerEdge XR5610
- PowerEdge XR5610c
- PowerEdge XR8620t
- PowerEdge XR8610t
- PowerEdge MX7000
- PowerEdge M1000e
- PowerEdge VRTX
- PowerEdge FX2
- PowerEdge FX2s
List of supported Dell VxRail hyper-converged appliances:
- VxRail D560
- VxRail D560F
- VxRail E460
- VxRail E460F
- VxRail E560
- VxRail E560F
- VxRail E560N
- VxRail E660N
- VxRail E660
- VxRail E660F
- VxRail E665
- VxRail E665N
- VxRail G560
- VxRail G560F
- VxRail P470N
- VxRail P570
- VxRail P570F
- VxRail P580N
- VxRail 6470F
- VxRail V670F
- VxRail S670
- VxRail P470
- VxRail P470F
- VxRail P670N
- VxRail P675F
- VxRail P675N
- VxRail P670F
- VxRail S470
- VxRail S570
- VxRail V470
- VxRail V470F
- VxRail V570
- VxRail V570F
- VxRail VD-4510c
- VxRail VD-4520c
- VxRail VE-660
- VxRail VE-6615
- VxRail VP-760
- VxRail VP-7625
- VxRail VS-760
- PowerEdge HS5610
- PowerEdge HS5620
- OpenManage Enterprise supports vSAN Ready Nodes for discovery, inventory, monitoring, and device alerts only. To manage device firmware, configurations, and deployment, use the OpenManage Enterprise Integration for VMware vCenter plug-in.
- An asterisk (*) next to a table name indicates that support for the devices has been added in this release.
- vSAN Ready Node C6420
- vSAN Ready Node C6620
- vSAN Ready Node MX760C
- vSAN Ready Nodes R440
- vSAN Ready Node R640
- vSAN Ready Node R740xd
- vSAN Ready Node R840
- vSAN Ready Node R6415
- vSAN Ready Node R7415
- vSAN Ready Node R7425
- vSAN Ready Node R650
- vSAN Ready Node R750
- vSAN Ready Node R6515
- vSAN Ready Node R7515
- vSAN Ready Node R7525
- vSAN Ready Node R660
- vSAN Ready Node R760
- vSAN Ready Node R6615
- vSAN Ready Node R6625
- vSAN Ready Node R7615
- vSAN Ready Node R7625
- vSAN Ready Node R860
- PowerEdge FD332
The following table lists the supported Dell Storage devices—previously Dell Compellent devices.
- FS8600 version 6
- SC7020
- SCv3000
- SC9000
- SC5020
- SCv3020
- SC3020 version 7.5.1
- MD3220
- MD3200
- MD3200i
- MD3800f
- MD3820f
- MD3860f
- MD3800i
- MD3820i
- MD3400
- MD3420
- MD3460
- MD3060e
- ME4012
- ME4024
- ME4084 (not in the JBOD mode)
- ME5024
- ME5012
- ME5084
- ME5224
- NX3340
- NX3240
- PowerFlex Rack R640
- PowerFlex Rack R740xd
- PowerFlex Rack R840
- PowerFlex Rack R650
- PowerFlex Rack R750
- PowerFlex Rack R7525
- PowerFlex Rack R6525
- PowerFlex Appliance R640
- PowerFlex Appliance R740xd
- PowerFlex Appliance R840
- PowerFlex Appliance R650
- PowerFlex Appliance R750
- PowerFlex Appliance R7525
- PowerFlex Appliance R6525
- PowerFlex Custom Node R640
- PowerFlex Custom Node R740xd
- PowerFlex Custom Node R840
- PowerFlex Custom Node R650
- PowerFlex Custom Node R750
- PowerFlex Custom Node R7525
- PowerFlex Custom Node R6525
Supported CDU firmware version is 1.14 and later.
- MotivAir MCDU-4U-T-010 equipped with PLC firmware v1.2.3 (including RedFish stack for system management) and BossOne firmware v1.14
- Delta 21-inch power shelves 33KW 60A*
- Lite-On 21-inch power shelves 33kW*
- APC by Schneider Electric rack PDU 2G (support rPDU2 SNMP OIDs .1.3.6.1.4.1.318.1.1.26)
- Vertiv Geist rack PDUs (Info SNMP OIDs .1.3.6.1.4.1.21239.5.2.1 and PDU SNMP OIDs .1.3.6.1.4.1.21239.5.2.3)
- Dell PDU (H98NW)
- APC by Schneider Electric (Smart UPS with SNMP interface version 1 and version 2)
NVIDIA GPU cards for PowerEdge 14G and later PowerEdge servers are supported in Power Management. For more information about the supported models, see PowerEdge server GPU matrix.
Lists the chassis and the input/output aggregators which support IOA template deployment.
| PowerEdge Chassis devices | Supported IOAs | Managing device configurations and deployment | Dell Networking OS version |
|---|---|---|---|
| PowerEdge M1000e | MIOA | No | OS9 |
| PowerEdge FX2s | FN2210S | Yes | OS9 |
| PowerEdge FX2s | FN410S | Yes | OS9 |
| PowerEdge FX2s | FN410T | Yes | OS9 |
- HPE servers having Integrated Lights-Out 5 (iLO 5)
- Lenovo servers having XClarity Controller (XCC)
- Double asterisk (**) indicates that discovery and inventory, monitoring and device alerts operation takes place during the corresponding chassis operation.
- An asterisk (*) next to a device's name indicates that support for the device has been added in this release.
| Networking devices | Dell networking minimum OS version |
|---|---|
| MX5108N** | OS10 |
| MX7116N** | Managed via Modular Edition |
| MX9116N** | OS10 |
| MXG610S** | Managed via Modular Edition |
| MXL 10/40GbE** | OS9 |
| N3248TE | OS10.5.2.0 |
| S3048-ON | OS9 |
| S4048-ON | OS9 |
| S4112F-ON | OS10 |
| S4112T-ON | OS10 |
| S4128F-ON | OS10 |
| S4128T-ON | OS10 |
| S4148F-ON | OS10 |
| S4148FE-ON | OS10 |
| S4148T-ON | OS10 |
| S4148U-ON | OS10 |
| S4248FB | OS10.5.2.0 |
| S4248FB-ON | OS10 |
| S4248FBL-ON | OS10 |
| S5148F-ON | OS10 |
| S5212F-ON | OS10 |
| S5224F-ON | OS10 |
| S5232F | OS10 |
| S5232** | OS10 |
| S5248** | OS10 |
| S5248F-ON | OS10 |
| S5296F-ON | OS10 |
| S5296F | OS10.5.2.0 |
| S5448** | OS10.5.2.0 |
| S6010 | OS10.5.2.0 |
| S6010-ON | OS10 |
| S6100-ON | OS9 |
| Z9100 | OS10.5.2.0 |
| Z9100-ON | OS9 |
| Z9264F | OS10.5.2.0 |
| Z9264F-ON | OS10 |
| Z9332F | OS10 |
| Z9432** | OS10 |
| C9010 | OS9.14.2.8 |
| C1048 | OS9.14.2.8 |
| S5248F* | SONiC |
| Z9432F* | SONiC |
| Z9864F* | SONiC |
| Z9664F* | SONiC |
| S3248T* | SONiC |
Lists the Dell system agents and interfaces that are supported in this version of OpenManage Enterprise.
| Agent or interface | Supported version |
|---|---|
| Dell Chassis Management Controller (CMC) |
|
| Dell OpenManage Enterprise Modular Edition | For the PowerEdge MX7000 chassis—1.2 and later versions. |
| iDRAC9 and iDRAC10 |
NOTE:
|
| Dell Repository Manager | 3.0 and later versions. |
| Networking OS |
NOTE: For a complete list of supported networking devices, refer to Networking device support in this KB article.
|
| HPE iLO Remote Server Management Software | BMC firmware version iLO 5 and later. |
| Lenovo XClarity Controller | BMC firmware version 1.00 and later. |
Lists the Cyber Ark versions that are supported in this version of OpenManage Enterprise.
| OpenManage Enterprise version | Supported CyberArk Versions |
|---|---|
| Version 4.5 | CyberArk version 13.2.2 |
Lists the hypervisors that are supported on management stations.
| Hypervisor | Supported version |
|---|---|
| VMware vSphere support |
|
| Microsoft Hyper-V support on Windows Server |
|
| KVM support on Red Hat Linux |
|
Lists the supported operating systems on the managed devices for in-band device management.
| Operating systems | Discovery and inventory | Device alerts | Managing device configurations and deployment | Driver update | Power Management |
|---|---|---|---|---|---|
| Windows Server 2022 | Yes | Yes | No | Yes | Yes |
| Windows Server 2025 | Yes | Yes | No | Yes
NOTE: Driver update is not supported for Windows Server 2025 that have Windows Defender Application Control (WDAC) enabled.
|
Yes |
| Azure Stack HCI V2 | Yes | Yes | No | No | No |
| Azure Stack HCI 24H2* | Yes | Yes | No | No | No |
| ESXi 7.0 | Yes | Yes | No | No | Yes |
| ESXi 7.0 U1 | Yes | Yes | No | No | Yes |
| ESXi 7.0 U2 | Yes | Yes | No | No | Yes |
| ESXi 7.0 U3 | Yes | Yes | No | No | Yes |
| ESXi 8.0 | Yes | Yes | No | No | No |
| ESXi 8.0 U1 | Yes | Yes | No | No | Yes |
| ESXi 8.0 U2 | Yes | Yes | No | No | Yes |
| ESXi 9.0* | Yes | No | No | No | Yes |
| RHEL 9.6* | Yes | Yes | No | No | No |
| RHEL 10* | Yes | Yes | No | No | No |
| Ubuntu 22.04.4 | Yes | Yes | No | No | No |
| Ubuntu 24.0 | Yes | Yes | No | No | No |
| Ubuntu 24.04.1 | Yes | Yes | No | No | No |
| SLES 15 SP7* | Yes | Yes | No | No | No |
| PowerEdge Generation | Supported Platforms |
|---|---|
| PowerEdge 16G Servers |
|
| PowerEdge 15G Servers |
|
| PowerEdge 14G Servers |
|
| PowerEdge Generation | Supported Platforms |
|---|---|
| PowerEdge 15G Servers |
|
| PowerEdge C Series Servers |
|
| PowerEdge XR Series Servers |
|
| Browser | Supported version |
|---|---|
| Mozilla Firefox | 52 and later |
| Google Chrome | 58 and later |
| Microsoft Edge | 41.16299 and later |
View the supported devices, components, features, and metrics in Power Management.
| Device type | Supported metrics and features |
|---|---|
| 17th generation of PowerEdge servers | The following are not supported:
|
| 16th generation of PowerEdge servers |
|
| 15th generation of PowerEdge servers |
|
| 14th generation of PowerEdge servers | All features and metrics are supported |
| PowerEdge M1000e, VRTX, FX2, and FX2s chassis |
|
| PowerEdge MX7000 chassis |
|
| PDU |
|
| UPS |
|
| Non-Dell servers |
|
| GPUs |
Minimum, maximum, and average of:
|
| PSUs |
|
| CPUs | Minimum, maximum, and average of CPU Socket - Thermal |
| PowerFlex | PowerFlex device monitoring is supported. PowerFlex device management such as policy and EPR is not supported. |
| Coolant Distribution Unit (CDU) |
|
- Modular servers do not support System Airflow values.
- The minimum and maximum values that are reported by MX7000 chassis for power and temperature metrics are the lowest and highest values that are ever encountered by the chassis for the respective metrics since the last time these metrics are reset in OpenManage Enterprise Modular. The current values might not reflect the actual value of these metrics at a specified time interval.