Avamar: Een Windows Avamar-client registreren met behulp van de opdrachtregelinterface (CLI)

Summary: In dit artikel wordt beschreven hoe u de Avamar-client activeert met behulp van de CLI in een Windows-omgeving.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Opdrachtgebruik: avregister MCSNAME[DOMAIN]

De MCSNAME is het IP-adres of de naam van het Avamar utility-knooppunt.

DOMEIN is het doel-Avamar-domein waar het register moet worden geregistreerd.

Voorbeeld: 

C:\Program Files\avs\bin>avregister 10.x.x.12 /clients

C:\Program Files\avs\bin>avagent --quiet --init --daemon=false --mcsaddr="192.168.1.1" --dpndomain="/clients" --logfile="C:\DOCUME~1\user\LOCALS~1\Temp\avagen
t_cmdline.log"
avagent Info <5241>: Logging to C:\DOCUME~1\user\LOCALS~1\Temp\avagent_cmdline
.log
C:\Program Files\avs\bin>goto :start_agent

C:\Program Files\avs\bin>net start "Backup Agent"
The Backup Agent service is starting.
The Backup Agent service was started successfully.

Additional Information

 

Affected Products

Avamar

Products

Avamar
Article Properties
Article Number: 000021248
Article Type: How To
Last Modified: 27 Mar 2024
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.