방법: USB를 통해 iDRAC에 연결(Dell PowerEdge 플랫폼의 모든 데이터 보호 어플라이언스)
Summary: Dell PowerEdge(Gen13 및 Gen14) 플랫폼을 사용하는 Data Protection 어플라이언스는 USB 서비스 포트를 통해 iDRAC에 직접 연결할 수 있습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Dell PowerEdge(Gen13 및 Gen14) 플랫폼을 사용하는 Data Protection 어플라이언스는 USB 서비스 포트를 통해 iDRAC에 직접 연결할 수 있습니다.
이 연결을 사용하면 IP를 통해 연결하는 것과 동일하거나 완전한 기능을 사용할 수 있습니다.
적용 대상:
- Dell PowerEdge 플랫폼을 사용하는 모든 데이터 보호 어플라이언스
- 예: PowerProtect DD3300 | DD6900 | DD9400 | DD9900 | 엑스400 | DP4400
- Dell PowerEdge Gen 13 및 Gen 14 서버
사전 구성 요소:
- USB(A) - 마이크로 USB(B) 케이블
- iDRAC 사용자 이름 및 암호(기본값 = root/calvin OR root/PSNT)
- USB(A) 포트가 있는 노트북
- BIOS에서 "iDRAC Direct" USB 포트 활성화(기본값 = 활성화)
- 시스템 BIOS를 사용하여 iDRAC Direct USB 포트를 활성화 또는 비활성화할 수 있습니다.
System BIOS>Integrated Devices로 이동합니다.
iDRAC Direct USB 포트를 활성화하려면 On을 선택하고 Disable을 선택하여 비활성화합니다.
- 시스템 BIOS를 사용하여 iDRAC Direct USB 포트를 활성화 또는 비활성화할 수 있습니다.

필요한 USB 케이블의 예
USB를 통해 iDRAC에 직접 연결하는 방법:
-
USB 케이블을 서버/어플라이언스의 IDRAC Direct 포트(Micro-USB) 및 관리 시스템(예: 노트북)

의 iDRAC Direct USB 포트에 연결합니다. R740의 iDRAC Direct USB 포트
C6420(x400)의 iDRAC Direct USB 포트 노드 1(상단)은 케이블이 연결되지 않은 포트를 보여줍니다. -
IP 주소 169.254.0.4가 랩톱에 할당되었는지 확인합니다.
#ipconfig
-
웹 브라우저를 열고 iDRAC IP 주소 169.254.0.3을 가리킵니다.

-
유효한 자격 증명을 사용하여 iDRAC에 로그인합니다(기본값 = root/calvin 또는 root/PSNT).

Additional Information
메모:
Gen13 플랫폼:
Gen13 플랫폼:
- USB A/A 케이블 사용(양쪽 끝에 표준 USB 연결)
- Type A USB-micro-B 케이블 사용
참조:
Data Domain: DD3300에서 iDRAC를 구성하는 방법
Affected Products
Data DomainProducts
Data Domain, DD3300 Appliance, PowerProtect DP4400, PowerProtect Data Protection Software, Integrated Data Protection Appliance Family, PowerProtect Data Protection Hardware, PowerProtect X400 ApplianceArticle Properties
Article Number: 000021505
Article Type: How To
Last Modified: 12 Sep 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.