VxRail：升级在主机“Lifecycle Controller：应用更新或设置系统配置。作业已完成。继续执行 SSM 任务。”
Summary: 在升级期间，主机卡住并且无法启动，并显示消息“Lifecycle Controller：正在应用更新或设置系统配置（作业已完成。继续执行 SSM 任务。）”
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
VxRail：主机在升级期间卡在 "Lifecycle Controller: Applying updates or setting system configuration"
在升级过程中，当主机置于维护模式并重新启动时，它不会启动并显示以下屏幕：
LCM 日志：
Failed to upgrade: <upgrade file name>, with exception: com.vce.lcm.exception.LCMException: Failed to reboot host <host name>.
Cause
当某个 iDRAC 生命周期任务卡住时，可能会发生这种情况。
Resolution
要解决此问题，请重置生命周期任务。
- 通过 SSH 连接到节点的 iDRAC，然后键入以下命令：
racadm jobqueue delete -i JID_CLEARALL_FORCE racadm set LifecycleController.LCAttributes.LifecycleControllerState 0 racadm set LifecycleController.LCAttributes.LifecycleControllerState 1 racadm racreset
- 使用 Virtual Power Drain从 iDRAC UI 重置节点。（见下图）
- 等到节点启动。
- 节点启动后，VxRail Manager UI 上的升级任务失败。
- 从 UI 重试升级。
Additional Information
如果节点在上述步骤后仍未启动，请尝试释放节点的残余电量。请参阅文章：如何重置和耗尽 Dell PowerEdge 服务器的电量？
Affected Products
VxRail, VxRail Appliance Series, VxRail E560, VxRail E560F, VxRail E560N, VxRail E660, VxRail E660F, VxRail E660N, VxRail E665, VxRail E665F, VxRail E665N, VxRail P470, VxRail P570, VxRail P570F, VxRail P580N, VxRail P670F, VxRail P670N, VxRail P675F
, VxRail P675N, VxRail S570, VxRail S670, VxRail V570, VxRail V570F, VXRAIL V670F, VxRail VE-660, VxRail VE-6615, VxRail VP-760, VxRail VP-7625, VxRail VS-760
...
Products
VxRail Appliance Family, VxRail Appliance Series, VxRail E560, VxRail E560F, VxRail G560, VxRail G560F, VxRail P570, VxRail P570F, VxRail S570, VxRail V570, VxRail V570FArticle Properties
Article Number: 000057205
Article Type: Solution
Last Modified: 11 Apr 2025
Version: 6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.