Wyse 3040 Thin Client Unable to Power On
Summary: Wyse 3040 Thin Client may be unable to turn on fully if the BIOS is configured for mini-boot.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Affected Products:
- Wyse 3040 Thin Client
The LED turns white briefly and then turns off, when initially turning on the Wyse 3040 Thin Client after plugging in the AC adapter.
This behavior occurs when:
BIOS Setup > Power Management > AC Recovery is set to Power Off.
This setting will turn off the unit after performing initial basic function checks.
Note: This behavior only occurs when first plugging in the AC adapter.
Cause
Not Applicable
Resolution
In BIOS Setup, set AC Recovery to Power On.
Affected Products
Wyse 3040 Thin ClientArticle Properties
Article Number: 000126002
Article Type: Solution
Last Modified: 22 Apr 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.