如何在 Dell Encryption Enterprise 上執行 WSDeactivate
Summary: 可依照以下指示在 Dell Encryption Enterprise (先前稱為 Dell Data Protection Enterprise Edition) 上執行 WSDeactivate。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
本文提供如何執行的指示 WSDeactivate 在 Dell Encryption Enterprise 上 (先前稱為 Dell Data Protection |Enterprise Edition)。
受影響的產品:
- Dell Encryption Enterprise
- Dell Data Protection | Enterprise Edition
受影響的作業系統:
- Windows
取得 WSDeactivate 通過聯繫支持人員,然後 運行 它。如需詳細資訊,請按一下相關程序。
取得
- 請聯絡 Dell Data Security 支援以提出要求
WSDeactivate。注意:若要瞭解如何聯絡 Dell Data Security 支援的更多資訊,請參閱 Dell Data Security 國際支援電話號碼。 - 收到後,以滑鼠右鍵按一下支援提供的檔案,然後選取全部解壓縮。
- 以滑鼠右鍵按一下
WSDeactivate.zip,然後選擇 全部提取。
- 解壓縮的資料夾包含
WSDeactivate。
執行
WSDeactivate 可以使用使用者介面 (UI) 或命令行介面 (CLI) 執行。如需詳細資訊,請按一下相關的方法。
- 開啟
WSDeactivate資料夾。
- 按兩下適當版本的
WSDeactivate。
注意:公用程式的位元速率必須與作業系統的架構相符。WSDeactivate_x64- 64位版本WSDeactivate_x86- 32位版本
- 從
WSDeactivator視窗中,按一下 執行。
- Vault Remover 視窗隨即顯示。按一下確定。電腦會重新開機。

- 以滑鼠右鍵按一下 Windows「開始」功能表,然後選取執行。

- 在「執行」使用者介面 (UI) 中輸入 cmd,然後按下 CTRL+SHIFT+ENTER 以系統管理員身分執行命令提示字元。

- 如果已啟用使用者帳戶控制 (UAC),請按一下是。

- 從命令提示字元中,執行
WSDeactivate使用所需的參數。
參數:
下表顯示的參數可用於 WSDeactivate。
| 參數 | 意義 |
|---|---|
–s |
以無聲方式執行公用程式、抑制執行和重新啟動確認提示 |
–n |
無重新啟動,在停用後抑制重新啟動 |
CLI 範例:
範例 #1:
WSDeactivate_x64 -s
範例 #1 包含:
- 位元:x64
- 無聲模式安裝 = 是
- 重新啟動 = 是
範例 #2:
WSDeactivate_x86 -s -n
範例 #2 包含:
- 位元:x32
- 無聲模式安裝 = 是
- 重新啟動 = 否
其他資源:Dell Encryption 說明文件 - Dell Encryption WSDeactivate 使用指南
如要聯絡支援部門,請參閱 Dell Data Security 國際支援電話號碼。
請前往 TechDirect,以線上產生技術支援要求。
如需更多深入見解與資源,請加入 Dell 安全性社群論壇。
Affected Products
Dell EncryptionArticle Properties
Article Number: 000126182
Article Type: How To
Last Modified: 18 Dec 2024
Version: 12
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.