MD Series: MD36xxf Potential I/O path error with Fibre Channel chip and Controller memory
Summary: This article covers information about /O path error between Fibre Channel chip and RAID controller memory on controller firmware older than 07.84.44.60 and how to resolve.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
PowerVault MD36xxf arrays running controller firmware previous to version 07.84.44.60 may potentially experience an I/O path error between Fibre Channel chip and RAID Controller memory.
Cause
Firmware previous to version 07.84.44.60 on MD36xxf units
Resolution
The issue has been addressed in the 07.84.44.60 and later firmware releases. Update the controllers to the latest firmware.
Affected Products
PowerVault MD3600F, PowerVault MD3620F, PowerVault MD3660fArticle Properties
Article Number: 000139636
Article Type: Solution
Last Modified: 20 Jun 2025
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.