TL1000 : How to find the service Tag via the Java Web Interface?

Summary: This tutorial explains how to find the PowerVault TL1000 Service Tag via the management web interface.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

 

SLN303451_en_US__1icon Note: This article is part of the Dell PowerVault knowledge library, available here.

 

Cause

-

Resolution

This tutorial explains how to find the PowerVault TL1000 Service Tag via the management web interface. It works only for library where the firmware is in version 0071.3000 or later. If the service tag is not displayed, the solution is to physically check in front of the device.

   

Warning: The Service Tag will be displayed only when Library Firmware is in version 0071.3000 or later. The library serial number is not the Service Tag.

 



SLN303451_en_US__21


 

Prerequisites:


The library management interface IP address has to be reachable.
Java has to be installed on your server.



 

Steps:


Open an internet navigator and connect to the library mangement inteface.
You will receive a default Java welcome message:

SLN303451_en_US__32 - Copy

 
Check  "I accept the risk and want to run this application" , then click on Run

Connect with the administrator credentials, the default password is:

 
Account admin
Password secure


SLN303451_en_US__43 - Copy


On the home page you will find the Service Tag on the right of "Service Tag". The library serial number is not the Service Tag.


  SLN303451_en_US__5service tag tl1000





 

Affected Products

PowerVault TL1000
Article Properties
Article Number: 000140793
Article Type: Solution
Last Modified: 07 Oct 2021
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.