MD Series: How to update MD3060e EMMs connected to MD3x60x controllers

Summary: This article covers the steps used to update MD3060e Enclosure Management Modules (EMMs) connected to MD3x60 raid controllers.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

This tutorial covers the update of MD3060e daisy chained with MD3x60 array using Modular Disk Storage Manager (MDSM).

EMM updates can be made in production if the cabling is correct. The Recovery Guru indicates if there are any issues. If there are any issues, contact Support for assistance.

Prerequisites:

Steps:

  1. Verify that the storage array is optimal
    1. Open MDSM
    2. Double-click or right click -> Manage on the wanted storage array
    3. Check that the array shows Optimal
    4. If it shows "Needs Attention",
      1. Work through the listed errors
      2. Contact Support if assistance is needed
  2. Click Upgrade on the Tool bar
  3. Click EMM Firmware
    1. mdsm update
  4.  The update window opens
    1.  mdsm update  
  5.  Click Select File...
  6. Find the MD3060e_Firmware_039F.esm from the downloaded file
  7.  Click Start
  8. There is a confirmation message when the update completes

Affected Products

MD Series, PowerVault MD3060e
Article Properties
Article Number: 000140942
Article Type: How To
Last Modified: 21 Mar 2025
Version:  9
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.